Synthesis of N-doped chiral macrocycles by regioselective palladium-catalyzed arylation

• Shuhai Qiu and
• Junzhi Liu

Beilstein J. Org. Chem. 2025, 21, 1917–1923, doi:10.3762/bjoc.21.149

• through circular dichroism (CD) and circularly polarized luminescence (CPL) spectroscopy. Results and Discussion The syntheses of N-doped macrocycles MC1–3 are shown in Scheme 1. Diamines 1a and 1b were synthesized by double Pd-catalyzed C–N coupling reaction of 4,6-dichlorobenzene-1,3-diamine with phenyl

Stereoselective electrochemical intramolecular imino-pinacol reaction: a straightforward entry to enantiopure piperazines

• Margherita Gazzotti,
• Fabrizio Medici,
• Valerio Chiroli,
• Laura Raimondi,
• Sergio Rossi and
• Maurizio Benaglia

Beilstein J. Org. Chem. 2025, 21, 1897–1908, doi:10.3762/bjoc.21.147

• -pinacol coupling reaction are efficient, they often require more than stoichiometric amounts of metal reductants and produce significant quantities of metal waste, which in some cases can present considerable environmental and safety concerns. To mitigate this issue, more sustainable approaches, such as

• resulted in a wide range of diamines, obtained in moderate to good yields. Inspired by these works, we aimed to investigate and optimize the stereoselective electrochemical intramolecular imino-pinacol coupling reaction under both batch and continuous flow conditions as a direct approach to enantiopure

• vicinal diamines. Historical perspective on electrochemical imino-coupling protocols. Stereoselective electroreductive intramolecular imino-pinacol reaction. Scope of the imino-pinacol coupling reaction. Reaction conditions: GC electrodes, NEt4BF4 (2.6 equiv), MsOH (3 equiv), constant current 5 mA (2.5 mA

Convenient alternative synthesis of the Malassezia-derived virulence factor malassezione and related compounds

• Karu Ramesh and
• Stephen L. Bearne

Beilstein J. Org. Chem. 2025, 21, 1730–1736, doi:10.3762/bjoc.21.135

• -protected malassezione, which upon deprotection yields malassezione in an overall yield of ca. 20%. This is an improvement over the preparation of the isonitrile followed by an Fe hydride initiated isonitrile–olefin intramolecular coupling reaction, which generated malassezione with an overall yield of ca

• [20], or, more recently, (iii) prepared via an Fe hydride initiated isonitrile–olefin intramolecular coupling reaction (Scheme 1A) [18]. The reported synthetic route relies on an initial 4-step preparation of the isonitrile precursor, which was accomplished in an overall yield of ca. 14%. The

• . 20% (4 steps) relative to an overall yield of ca. 5% via the preparation of the isonitrile followed by the Fe hydride initiated isonitrile–olefin intramolecular coupling reaction [18]. Protection of the indole nitrogens with the Boc group was preferable to the use of benzyl protecting groups since

Approaches to stereoselective 1,1'-glycosylation

• Daniele Zucchetta and
• Alla Zamyatina

Beilstein J. Org. Chem. 2025, 21, 1700–1718, doi:10.3762/bjoc.21.133

• : 4-methoxyacetophenone (MAP) and 2,2-dimethoxy-2-phenylacetophenone (DPAP), in a frozen state (−80 °C) with acetic acid as the solvent. A second thiol–ene coupling reaction between the 1,2-cis-glycosyl thiols and the 2-substituted glycals produced a series of α,α-1,1'-thiodisaccharides with high

Catalytic asymmetric reactions of isocyanides for constructing non-central chirality

• Jia-Yu Liao

Beilstein J. Org. Chem. 2025, 21, 1648–1660, doi:10.3762/bjoc.21.129

• high enantioselectivities. Beyond planar and axial chirality, the same group developed a three-component coupling reaction of 2,2′-diisocyano-1,1′-biphenyls 16, aryl iodides, and carboxylates (Scheme 3a) [30]. Under chiral palladium catalysis, unique inherently chiral saddle-shaped bridged biaryls 17

Formal synthesis of a selective estrogen receptor modulator with tetrahydrofluorenone structure using [3 + 2 + 1] cycloaddition of yne-vinylcyclopropanes and CO

• Jing Zhang,
• Guanyu Zhang,
• Hongxi Bai and
• Zhi-Xiang Yu

Beilstein J. Org. Chem. 2025, 21, 1639–1644, doi:10.3762/bjoc.21.127

• the 6/5/5 skeleton, and a Heck coupling reaction constructing the [3.2.1] framework, are the two key reactions in this 11-step synthesis. Keywords: [3 + 2 + 1] cycloaddition; selective estrogen receptor modulators; synthesis; tetrahydrofluorenone; Introduction Estrogen receptors (ERs) [1][2] are

• alkyne moiety is installed via Sonogashira coupling reaction using aryl iodide 5. The cyclopropyl ring in 5 can be introduced via an SN2 reaction of compound 2 with tert-butyl cyclopropanecarboxylate (3). Scheme 5 summarizes the final successful execution of this route. The starting material 2 is a known

• % yield with a cyclopropyl group. Then reducing the carboxylate group in 4 with DIBAL-H afforded alcohol 5 in 67% yield. Next, Sonogashira coupling reaction between 5 and trimethylsilylacetylene generated 6 with an alkyne moiety quantitatively. After that, the hydroxy group in 6 was oxidized into a

Synthesis of an aza[5]helicene-incorporated macrocyclic heteroarene via oxidation of an o-phenylene-pyrrole-thiophene icosamer

• Yusuke Matsuo,
• Aoi Nakagawa,
• Shu Seki and
• Takayuki Tanaka

Beilstein J. Org. Chem. 2025, 21, 1561–1567, doi:10.3762/bjoc.21.119

• hybrid decamer 3 in a previous report [26], via a Suzuki–Miyaura cross-coupling reaction between dibromo precursor 1 and borylated precursor 2 (Scheme 1). The resulting mixture was successfully separated by column chromatography on silica using CH2Cl2/n-hexane as an eluent to give icosamer 4 in 6% yield

Oxetanes: formation, reactivity and total syntheses of natural products

• Peter Gabko,
• Martin Kalník and
• Maroš Bella

Beilstein J. Org. Chem. 2025, 21, 1324–1373, doi:10.3762/bjoc.21.101

Recent advances and future challenges in the bottom-up synthesis of azulene-embedded nanographenes

• Bartłomiej Pigulski

Beilstein J. Org. Chem. 2025, 21, 1272–1305, doi:10.3762/bjoc.21.99

• exceptionally high yield (97%). A Suzuki cross-coupling reaction between 47 and 45 gave compound 48 which was subjected to a final Scholl oxidation using DDQ. The target compound 49, containing two azulene subunits, was obtained in a relatively low yield (16%). Analysis of NICS values for 49 revealed similar

Synthetic approach to borrelidin fragments: focus on key intermediates

• Yudhi Dwi Kurniawan,
• Zetryana Puteri Tachrim,
• Teni Ernawati,
• Faris Hermawan,
• Ima Nurasiyah and
• Muhammad Alfin Sulmantara

Beilstein J. Org. Chem. 2025, 21, 1135–1160, doi:10.3762/bjoc.21.91

• these sulfones with epoxides 23b and 23a, respectively. Following the literature procedure for a similar reaction, using n-butyllithium in the presence of BF3·Et2O at −78 °C, the coupling reaction unfortunately resulted in the decomposition of the reactants (Scheme 4). The authors hypothesized that the

A versatile route towards 6-arylpipecolic acids

• Erich Gebel,
• Cornelia Göcke,
• Carolin Gruner and
• Norbert Sewald

Beilstein J. Org. Chem. 2025, 21, 1104–1115, doi:10.3762/bjoc.21.88

• yield of 88%. (R)-Methyl 6-oxopipecolate (7) was converted under Vilsmeier–Haack conditions [35][40][41] to undergo N-formylation and concomitant enol bromination to give product 2 (Scheme 2). Due to slow degradation of the bromide 2, the subsequent cross-coupling reaction was conducted immediately

• reduction product 13 of a Sonogashira–Hagihara cross-coupling reaction. This was synthesised under similar conditions as the Suzuki–Miyaura counterpart 3 utilising the same Pd catalyst, base and solvent. In addition, 10 mol % CuI as a co-catalyst and 2.0 equiv phenylacetylene (12) were used, resulting in

• –Miyaura cross-coupling reaction between bromide 2 and a variety of boronic acids 8. Reaction of 3a to (2R,6S)-9a and (2R,6R)-9a. The chromatograms prove the simple diastereoselection. a) Sonogashira–Hagihara cross-coupling reaction followed by b) NaBH3CN reduction of the N-acyliminium species and c

Recent advances in synthetic approaches for bioactive cinnamic acid derivatives

• Betty A. Kustiana,
• Galuh Widiyarti and
• Teni Ernawati

Beilstein J. Org. Chem. 2025, 21, 1031–1086, doi:10.3762/bjoc.21.85

• multimetal-organic framework (M-MOF, M= Cu, Ni) which successfully catalyzed the one-pot cyclopropenone hydration/Chan–Lam coupling reaction of 309 and boronic acid 341 to give the corresponding ester 310 in good yield via the formation of acid 342 (Scheme 76B). Cyclopropenone was also subjected to non-metal

• ) [131]. In addition, a gram scale operation has been successfully demonstrated. In addition, Hu and co-workers (2020) studied a catalyst-free multicomponent coupling reaction of benzynes derived from alkyne 349, cyclopropenone 309, and sulfoxides to give the corresponding o-(methylthio)phenyl acrylates

• and using ylide 397 altered the stereoselectivity to E-isomeric products 400 and 401 [144]. Wu and co-workers (2020) employed Pd to mediate the cross-coupling reaction of sulfoxonium ylide 402 and benzyl bromides to give the corresponding (Z)-ethyl cinnamates 403–406 in good yields via carbene

Synthesis of pyrrolo[3,2-d]pyrimidine-2,4(3H)-diones by domino C–N coupling/hydroamination reactions

• Ruben Manuel Figueira de Abreu,
• Robin Tiedemann,
• Peter Ehlers and
• Peter Langer

Beilstein J. Org. Chem. 2025, 21, 1010–1017, doi:10.3762/bjoc.21.82

• pyrrolopyrimidine derivatives. The envisioned methodology combines a Sonogashira–Hagihara reaction and a one-pot process comprising a Buchwald–Hartwig coupling reaction followed by a hydroamination [23][24]. Results and Discussion The bromination of 6-chloro-1,3-dimethyluracil (1) afforded, following a known

On the photoluminescence in triarylmethyl-centered mono-, di-, and multiradicals

• Daniel Straub,
• Markus Gross,
• Mona E. Arnold,
• Julia Zolg and
• Alexander J. C. Kuehne

Beilstein J. Org. Chem. 2025, 21, 964–998, doi:10.3762/bjoc.21.80

Studies on the syntheses of β-carboline alkaloids brevicarine and brevicolline

• Benedek Batizi,
• Patrik Pollák,
• András Dancsó,
• Péter Keglevich,
• Gyula Simig,
• Balázs Volk and
• Mátyás Milen

Beilstein J. Org. Chem. 2025, 21, 955–963, doi:10.3762/bjoc.21.79

• reactions: reduction of ring A of the β-carboline skeleton or trifluoroethylation of the pyrrole moiety occurred, leading to interesting and potentially useful derivatives. Keywords: alkaloid; β-carboline; Carex brevicollis DC; cross-coupling reaction; trifluoroethylation; Introduction Carex brevicollis

Chitosan-supported CuI-catalyzed cascade reaction of 2-halobenzoic acids and amidines for the synthesis of quinazolinones

• Xuhong Zhao,
• Weishuang Li,
• Mengli Yang,
• Bojie Li,
• Yaoyao Zhang,
• Lizhen Huang and
• Lei Zhu

Beilstein J. Org. Chem. 2025, 21, 839–844, doi:10.3762/bjoc.21.67

• , which acts as a base. Subsequently, I undergoes oxidative addition and complexation with the amidine 2 to generate intermediate II. This intermediate then undergoes reductive elimination to form intermediate III, releasing CS@CuI back into the system. Finally, the coupling reaction between the carboxyl

Synthesis and photoinduced switching properties of C₇-heteroatom containing push–pull norbornadiene derivatives

• Daniel Krappmann and
• Andreas Hirsch

Beilstein J. Org. Chem. 2025, 21, 807–816, doi:10.3762/bjoc.21.64

• a subsequent Suzuki cross-coupling reaction with (4-(diphenylamino)phenyl)boronic acid was performed. The reaction conditions were adapted from prior experiments with C-NBD1 [40] and further refined for the heterocyclic analogues. Optimal results were achieved using K2CO3, Pd(OAc)2 and RuPhos with

Recent advances in the electrochemical synthesis of organophosphorus compounds

• Babak Kaboudin,
• Milad Behroozi,
• Sepideh Sadighi and
• Fatemeh Asgharzadeh

Beilstein J. Org. Chem. 2025, 21, 770–797, doi:10.3762/bjoc.21.61

• amides with electron-withdrawing or electron-donating groups on their aromatic ring, producing products with yields ranging from 51% to 82%. In 2023, Lei and co-workers [47] reported an electrochemical C–P bond formation via a coupling reaction of C–H bonds of alkynes, alkenes, and aryl compounds with

• dialkyl phosphonates at carbon and platinum electrodes as the anode and cathode in the presence of a silver catalyst in a divided cell (Scheme 3). According to the report, the silver catalyst is central to the coupling reaction. The study of the effect of alternating current (a.c.) electrolysis parameters

• ferrocene and ruthenocene via coupling reaction. This method provides an efficient and versatile synthetic approach for producing phosphorylated metallocenes but also aids in interpreting the regioselectivity and reactivity of C−H functionalization in unsymmetric metallocenes. They used a platinum electrode

Orthogonal photoswitching of heterobivalent azobenzene glycoclusters: the effect of glycoligand orientation in bacterial adhesion

• Leon M. Friedrich and
• Thisbe K. Lindhorst

Beilstein J. Org. Chem. 2025, 21, 736–748, doi:10.3762/bjoc.21.57

• and excellent yield of 94% (Scheme 1). A chemoselective deprotection of the mannosyl thioacetate 7 to yield the glycosyl thiol 8 was achieved using 0.95 equivalents of sodium carbonate. The crude product was in turn submitted to a Buchwald–Hartwig–Migita cross-coupling reaction [33] with the

• -dithio-ᴅ-threitol) [36] (Scheme 2A). The crude thiol 14 was subsequently subjected to a Buchwald–Hartwig–Migita cross-coupling reaction with the literature-known azobenzene thioglucoside 15 [37], resulting in the (6-thioglucosyl)mannoside 16 in 63% yield over two steps. Zemplén deacetylation [38] gave

Formaldehyde surrogates in multicomponent reactions

• Cecilia I. Attorresi,
• Javier A. Ramírez and
• Bernhard Westermann

Beilstein J. Org. Chem. 2025, 21, 564–595, doi:10.3762/bjoc.21.45

• reaction by metal catalysis is an option to avoid the problems regarding iminium or aminal stability. This is an important issue in AAA coupling when formaldehyde is used as the C1 source. Finally, a later work proposes a catalysis-free protocol for the synthesis of propargylamines by an AHA coupling

• secondary amines such as piperidine or pyrrolidine afford an aminal or an iminium ion, in general under high temperature or pressure conditions, which is not the case for the AHA coupling [69][70]. Despite these cases, the absence of evidence in terms of iminium ion generation confirms that the AHA coupling

• reaction [71]. Here, the reaction is carried out under mild conditions (CH2Cl2, 70 °C) without the need for catalysis or additional base for the activation of C–H and C–X bonds of the alkyne and dihalomethane compounds, respectively. However, this strategy has a limited scope in terms of the alkyne

Synthesis of N-acetyl diazocine derivatives via cross-coupling reaction

• Thomas Brandt,
• Pascal Lentes,
• Jeremy Rudtke,
• Michael Hösgen,
• Christian Näther and
• Rainer Herges

Beilstein J. Org. Chem. 2025, 21, 490–499, doi:10.3762/bjoc.21.36

• compared to parent diazocine [3][13]. Reaction conditions of the arylation of halogenated N-acetyl diazocines via Stille coupling reaction. Equivalents are normalized to the used amount of N-acetyl diazocine starting material. Vinylation of halogenated N-acetyl diazocines via Pd-catalyzed coupling

Red light excitation: illuminating photocatalysis in a new spectrum

• Lucas Fortier,
• Corentin Lefebvre and
• Norbert Hoffmann

Beilstein J. Org. Chem. 2025, 21, 296–326, doi:10.3762/bjoc.21.22

Synthesis of disulfides and 3-sulfenylchromones from sodium sulfinates catalyzed by TBAI

• Zhenlei Zhang,
• Ying Wang,
• Xingxing Pan,
• Manqi Zhang,
• Wei Zhao,
• Meng Li and
• Hao Zhang

Beilstein J. Org. Chem. 2025, 21, 253–261, doi:10.3762/bjoc.21.17

• reaction at 120 °C for 2 hours were determined as optimal conditions for the reaction (Table 1, entry 14). Under the optimized conditions, the coupling reaction of various sodium arylsulfinates was investigated to assess the scope and generality of this protocol. The results, shown in Scheme 2

Streamlined modular synthesis of saframycin substructure via copper-catalyzed three-component assembly and gold-promoted 6-endo cyclization

• Asahi Kanno,
• Ryo Tanifuji,
• Satoshi Yoshida,
• Sota Sato,
• Saori Maki-Yonekura,
• Kiyofumi Takaba,
• Jungmin Kang,
• Kensuke Tono,
• Koji Yonekura and
• Hiroki Oguri

Beilstein J. Org. Chem. 2025, 21, 226–233, doi:10.3762/bjoc.21.14

• -fluorobenzene (see Scheme 2 and Supporting Information File 1 for details). Copper(I)-catalyzed three-component coupling reaction of alkyne 8, THIQ 9, and benzaldehyde, proceeded with exquisite control of regioselectivity to afford 10 in an excellent yield of 92% [43][44][45][46]. This efficient cascade

Recent advances in electrochemical copper catalysis for modern organic synthesis

• Yemin Kim and
• Won Jun Jang

Beilstein J. Org. Chem. 2025, 21, 155–178, doi:10.3762/bjoc.21.9

• –heteroatom (C–X, where X = N, O, or halogens) bonds in organic synthesis. Copper was one of the first transition metals employed in cross-coupling to form C–C and C–X bonds [1][2]. In 1901, Ullmann reported the first cross-coupling reaction for the formation of biaryl compounds in the presence of

• undergoes reductive elimination to provide the desired enantioenriched nitrile product 111 and Cu(I) catalyst 116. The resulting Cu(I) catalyst 116 is reoxidized to Cu(II) 117 at the anode, completing the catalytic cycle. Coupling reaction (Chan–Lam coupling) Transition metal-catalyzed C–N bond formation