Site-specific labelling of native peptides and proteins: chemical and enzymatic strategies

• Antonio Angelastro,
• Jonathan Bargh,
• Subhajit Guria,
• Victor Laserna and
• Louis Luk

Beilstein J. Org. Chem. 2026, 22, 857–881, doi:10.3762/bjoc.22.67

• , Cardiff, CF10 3AT, UK 10.3762/bjoc.22.67 Abstract Site-specific modifications of native-sequence proteins are technologies that underpin progresses in chemical biology, diagnostics and next-generation biotherapeutics. However, the pursuit of site-specificity has often come at the expense of scalability

• research to commercial applications: site-specificity, usability and scalability. Site-specificity. The ideal modification chemistry targets a single, well-defined site without stochastic off-site reactions. Product homogeneity enhances safety by mitigating toxic by-products that require excessive

• reagents, organic solvents or chaotropic agents must be avoided to preserve protein stability, preventing folding heterogeneity and supporting sustainability. Scalability. For therapeutic and industrial applications, modification methods should minimise waste and curtail costs, reflected in low process

Photoorganocatalytic trifluoromethylation of (het)arenes in green conditions

• Egor N. Boronin,
• Svetlana E. Kaurkina,
• Milena M. Svetlakova,
• Anton S. Bolshakov,
• Maxim V. Arsenyev,
• Vasilii F. Otvagin,
• Alexey Yu. Fedorov,
• Timothy Noël and
• Alexander V. Nyuchev

Beilstein J. Org. Chem. 2026, 22, 662–671, doi:10.3762/bjoc.22.50

• . Scaling-up Based on the optimized conditions, the scalability of the trifluoromethylation of TMB was evaluated (Table 3). First, a numbering strategy was applied (Table 3, entry 1), in which eight vials were used to conduct the reaction on a 2.4 mmol scale within the same photoreactor. Under these

Modern synthetic pathways towards eribulin and its subunits

• Sebastian Dominik Graf

Beilstein J. Org. Chem. 2026, 22, 495–526, doi:10.3762/bjoc.22.37

• received, 1.45 g of 27 were obtainable during the second one from one batch (Scheme 3, step e) showing the scalability of this path. Moreover, besides 22 and 27, Konda and co-workers also accomplished the stereoselective syntheses of other diastereomers of the target tetrahydrofuran unit starting from 13

• )-induced cyclization afforded 147 in good yield, which was hydrogenated subsequently. Thereafter, DIBAL-H reduction led to lactol formation towards 149, which intercepted the former route (Scheme 10, step (i) i.) With these changes, the synthesis was enhanced with regard to scalability of the process

• , use of cheap and readily available substrates and reagents, application of mild reaction conditions, and improving step economy and scalability of the process. Moreover, 3 new completed total syntheses were developed by Lee, Nicolaou and Kim, which show improvements in terms of overall yield or enable

Concept-driven strategies in target-oriented synthesis

• David Yu-Kai Chen,
• Chao Li and
• Yefeng Tang

Beilstein J. Org. Chem. 2026, 22, 451–454, doi:10.3762/bjoc.22.32

• era focused on "feasibility" to one centered around "scalability” [1]. Within this framework, molecular assemblies that integrate elements of "synthetic economy" [2][3][4][5][6] and “sustainability” are highly praised in the synthetic community, driven by methodological breakthroughs, technological

A facile and practical method for the synthesis of trans-(±)-taxifolin and its derivatives via Darzens reaction

• Bo Peng,
• Panpan Yang,
• Maaz Khan,
• Xiaotong Lin,
• Jiang Wu,
• Peng Fu and
• Qingqing Wu

Beilstein J. Org. Chem. 2026, 22, 443–450, doi:10.3762/bjoc.22.31

• acids (Table 2, entries 3, 4, and 6), with 40% HBr giving the best yield (68%). After having optimized the conditions for each step, the synthesis of trans-(±)-taxifolin on a decagram scale (Scheme 3) was carried out to illustrate the practicality and scalability of the designed protocol. Ten grams of

Arene activation via π-bond localization: concepts and opportunities

• Paul Meiners,
• Julian J. Melder and
• Tobias Morack

Beilstein J. Org. Chem. 2026, 22, 257–273, doi:10.3762/bjoc.22.19

• ) systems [56][57][58]. Beyond the conceptual advance, the Mo(0) manifold offers practical benefits in terms of scalability and recyclability [59]. However, the preparation of enantioenriched η2-arene complexes presented unique challenges. In contrast to the Re(I) and W(0) analogues, where resolution of the

• dearomatization platform, combining pronounced π-basicity with practical scalability. Exploiting these attributes, a new multistep dearomatization protocol has recently been developed, enabling the conversion of arenes into trisubstituted cyclohexenes through three discrete nucleophilic additions to an η2-phenyl

Total synthesis of natural products based on hydrogenation of aromatic rings

• Haoxiang Wu and
• Xiangbing Qi

Beilstein J. Org. Chem. 2026, 22, 88–122, doi:10.3762/bjoc.22.4

• limitations in terms of substrate scope, stereoselectivity, and scalability, leaving ample room for innovation in catalyst design and mechanistic understanding. Fan and co-workers have long been dedicated to the asymmetric catalysis of chiral diamine ruthenium complexes. In 2020, they reported the efficient

One-pot synthesis of ethylmaltol from maltol

• Immanuel Plangger,
• Marcel Jenny,
• Gregor Plangger and
• Thomas Magauer

Beilstein J. Org. Chem. 2025, 21, 2755–2760, doi:10.3762/bjoc.21.212

• % yield. Compared to the previous dianion approach, the developed process produced ethylmaltol (1) with a significantly improved purity profile and without the need for sub-zero temperatures. The scalability of this process was showcased by conversion of 10 g maltol (2) to 5.7 g ethylmaltol (1

Sustainable electrochemical synthesis of aliphatic nitro-NNO-azoxy compounds employing ammonium dinitramide and their in vitro evaluation as potential nitric oxide donors and fungicides

• Alexander S. Budnikov,
• Nikita E. Leonov,
• Michael S. Klenov,
• Andrey A. Kulikov,
• Igor B. Krylov,
• Timofey A. Kudryashev,
• Aleksandr M. Churakov,
• Alexander O. Terent’ev and
• Vladimir A. Tartakovsky

Beilstein J. Org. Chem. 2025, 21, 2739–2754, doi:10.3762/bjoc.21.211

• very important, as it overcomes one of the major obstacles to the sustainability and scalability of organic electrosynthesis: the need for a supporting electrolyte in addition to reactants. The synthesized nitro-NNO-azoxy arenes were discovered as a novel class of fungicides, with in vitro activity

Palladium-catalyzed regioselective C1-selective nitration of carbazoles

• Vikash Kumar,
• Jyothis Dharaniyedath,
• Aiswarya T P,
• Sk Ariyan,
• Chitrothu Venkatesh and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2025, 21, 2479–2488, doi:10.3762/bjoc.21.190

• nitro source. The catalytic system demonstrates a satisfactory substrate scope and excellent regioselectivity. The scalability of the reaction was demonstrated, further underscoring the robustness of the protocol. Overall, this study highlights the potential of palladium-catalyzed C–H activation

Enantioselective radical chemistry: a bright future ahead

• Anna C. Renner,
• Sagar S. Thorat,
• Hariharaputhiran Subramanian and
• Mukund P. Sibi

Beilstein J. Org. Chem. 2025, 21, 2283–2296, doi:10.3762/bjoc.21.174

• tolerance, and scalability [80]. Electrochemical methods offer the opportunity to tune reaction conditions by controlling parameters such as potential, current, electrode, and electrolyte [81], providing a sophisticated platform for attaining optimal reactivity. A variety of catalytic strategies can be

Synthesis of triazolo- and tetrazolo-fused 1,4-benzodiazepines via one-pot Ugi–azide and Cu-free click reactions

• Xiaoming Ma,
• Zijie Gao,
• Jiawei Niu,
• Wentao Shao,
• Shenghu Yan,
• Sai Zhang and
• Wei Zhang

Beilstein J. Org. Chem. 2025, 21, 2202–2210, doi:10.3762/bjoc.21.167

• spectra are provided in Supporting Information File 1. To evaluate the scalability of this protocol, we performed the synthesis of diazepine 8a on a gram scale with 10 mmol of 1a, which led to the formation of product 8a in 91% yield (Scheme 8). Conclusion We have developed a new synthetic method to

Electrochemical cyclization of alkynes to construct five-membered nitrogen-heterocyclic rings

• Lifen Peng,
• Ting Wang,
• Zhiwen Yuan,
• Bin Li,
• Zilong Tang,
• Xirong Liu,
• Hui Li,
• Guofang Jiang,
• Chunling Zeng,
• Henry N. C. Wong and
• Xiao-Shui Peng

Beilstein J. Org. Chem. 2025, 21, 2173–2201, doi:10.3762/bjoc.21.166

• ][94]. Electrochemical transformations used renewable and clean electricity as a source of electrons and electron holes to generate radical species, showing several superiorities such as safety, economy, high selectivity, scalability, mild reaction conditions, powerful efficiency, environment-friendly

C2 to C6 biobased carbonyl platforms for fine chemistry

• Jingjing Jiang,
• Muhammad Noman Haider Tariq,
• Florence Popowycz,
• Yanlong Gu and
• Yves Queneau

Beilstein J. Org. Chem. 2025, 21, 2103–2172, doi:10.3762/bjoc.21.165

Stereoselective electrochemical intramolecular imino-pinacol reaction: a straightforward entry to enantiopure piperazines

• Margherita Gazzotti,
• Fabrizio Medici,
• Valerio Chiroli,
• Laura Raimondi,
• Sergio Rossi and
• Maurizio Benaglia

Beilstein J. Org. Chem. 2025, 21, 1897–1908, doi:10.3762/bjoc.21.147

• the batch reactor (Table 2). The scalability of the reaction was further demonstrated by performing the electroreduction of diimine 1d on a 2.5 mmol scale under flow conditions. Compound 2d was obtained in 52% isolated yield achieving productivity and STY values that were 10.4 and 184.7 times higher

• . Significantly higher productivities and space-time yields were achieved under continuous conditions compared to the batch process. Furthermore, the scalability of the reaction was successfully demonstrated, highlighting its potential for larger-scale applications. Experimental General procedure in-batch

Fe-catalyzed efficient synthesis of 2,4- and 4-substituted quinolines via C(sp²)–C(sp²) bond scission of styrenes

• Prafull A. Jagtap,
• Manish M. Petkar,
• Vaishnavi R. Sawant and
• Bhalchandra M. Bhanage

Beilstein J. Org. Chem. 2025, 21, 1799–1807, doi:10.3762/bjoc.21.142

• features of this protocol include the use of O2 as an ideal, green oxidant, operational simplicity and scalability, high atom- and step-economy, and cost-effectiveness, collectively enabling the single-step synthesis of two medicinally relevant N-heterocycles in excellent combined yields. Keywords: C–C

• 6-bromo-2,4-diphenylquinoline (3g), both recognized for their antifungal activity [10], were successfully synthesized on a gram scale, showcasing the scalability and efficiency of the process (Scheme 3). After having demonstrated the broad substrate compatibility and the synthetic potential of this

Convenient alternative synthesis of the Malassezia-derived virulence factor malassezione and related compounds

• Karu Ramesh and
• Stephen L. Bearne

Beilstein J. Org. Chem. 2025, 21, 1730–1736, doi:10.3762/bjoc.21.135

• intent of using the benzyl group to protect the indole nitrogen rather than the Boc group. However, Pd-catalyzed hydrogenation of 25d led to a mixture of products, of which some were consistent with reduction of the indole ring. With respect to the scalability of the synthesis, the reactions can be

Continuous-flow-enabled intensification in nitration processes: a review of technological developments and practical applications over the past decade

• Feng Zhou,
• Chuansong Duanmu,
• Yanxing Li,
• Jin Li,
• Haiqing Xu,
• Pan Wang and
• Kai Zhu

Beilstein J. Org. Chem. 2025, 21, 1678–1699, doi:10.3762/bjoc.21.132

• tubular, continuous tank, bubbling and injection nitration reactor – directly governs thermodynamic control, product distribution, process scalability, and quality assurance [4][5]. Batch systems remain prevalent for low-throughput fine chemicals due to their operational flexibility, whereas continuous

• assess their advantages, limitations, and scalability potential in miniaturized systems [16]. However, a large number of literature cases on continuous-flow nitration reactions has emerged over the past decade, and there is a lot of general content that can be summarized from the research on continuous

• profiles, heat transfer characteristics, inherent safety protocols, and economic scalability parameters. Process parameters: The implementation of continuous-flow nitration processes rely on the precise control of multiple interdependent parameters, including but not limited to residence time, reaction

General method for the synthesis of enaminones via photocatalysis

• Paula Pérez-Ramos,
• Raquel G. Soengas and
• Humberto Rodríguez-Solla

Beilstein J. Org. Chem. 2025, 21, 1535–1543, doi:10.3762/bjoc.21.116

• view of these results, it seems evident that six-membered cyclic amines have the optimal ring size for the photocatalyzed enaminone formation process. For enaminones 9b–k the remaining mass balance comprised mainly unreacted starting materials. The scalability of the process was demonstrated in

Calcium waste as a catalyst in the transesterification for demanding esters: scalability perspective

• Anton N. Potorochenko and
• Konstantin S. Rodygin

Beilstein J. Org. Chem. 2025, 21, 1520–1527, doi:10.3762/bjoc.21.114

Oxetanes: formation, reactivity and total syntheses of natural products

• Peter Gabko,
• Martin Kalník and
• Maroš Bella

Beilstein J. Org. Chem. 2025, 21, 1324–1373, doi:10.3762/bjoc.21.101

• promoted by visible light at room temperature, requires no protecting atmosphere or additives, and the resulting polysubstituted oxetanes are obtained in moderate to good yields. Additional advantages include scalability and high chemoselectivity as various functional groups were tolerated, including

Recent advances in amidyl radical-mediated photocatalytic direct intermolecular hydrogen atom transfer

• Hao-Sen Wang,
• Lin Li,
• Xin Chen,
• Jian-Li Wu,
• Kai Sun,
• Xiao-Lan Chen,
• Ling-Bo Qu and
• Bing Yu

Beilstein J. Org. Chem. 2025, 21, 1306–1323, doi:10.3762/bjoc.21.100

• and operational scalability [9][10]. Moreover, a high temperature and additive oxidants are generally required, which would limit the substrate scope. The hydrogen atom transfer (HAT) process has emerged as a powerful avenue for addressing these challenges, leveraging the HAT reagents to selectively

Synthetic approach to borrelidin fragments: focus on key intermediates

• Yudhi Dwi Kurniawan,
• Zetryana Puteri Tachrim,
• Teni Ernawati,
• Faris Hermawan,
• Ima Nurasiyah and
• Muhammad Alfin Sulmantara

Beilstein J. Org. Chem. 2025, 21, 1135–1160, doi:10.3762/bjoc.21.91

• . The synthesis commenced with the treatment of precursor 92, obtained in three steps from ethylene glycol, with MeMgBr and catalytic 94/CuBr, yielding the 1,4-addition product 93 in 96% yield and excellent regioselectivity (ee 98%) (Scheme 15). The authors highlighted the scalability of this reaction

On the photoluminescence in triarylmethyl-centered mono-, di-, and multiradicals

• Daniel Straub,
• Markus Gross,
• Mona E. Arnold,
• Julia Zolg and
• Alexander J. C. Kuehne

Beilstein J. Org. Chem. 2025, 21, 964–998, doi:10.3762/bjoc.21.80

• overcoming scalability challenges in quantum technologies. Despite their potential, achieving high luminescence quantum yields has largely been limited to donor-functionalized monoradicals, and a detailed understanding of the luminescent behavior of open-shell organic molecules remains elusive. This review

Studies on the syntheses of β-carboline alkaloids brevicarine and brevicolline

• Benedek Batizi,
• Patrik Pollák,
• András Dancsó,
• Péter Keglevich,
• Gyula Simig,
• Balázs Volk and
• Mátyás Milen

Beilstein J. Org. Chem. 2025, 21, 955–963, doi:10.3762/bjoc.21.79

• position 4 of β-carboline by cross-coupling reactions. Thanks to its scalability, this novel approach ensures a broad accessibility to the target compound for potential pharmacological measurements. Using detailed NMR studies, the NMR signals have been assigned for both the base and its dihydrochloride