Kinetic resolution of racemic planar-chiral vinylcymantrenes by molybdenum-catalyzed asymmetric metathesis dimerization

• Haruna Imazu,
• Hitoshi Izu,
• Yasuhiro Ohki and
• Masamichi Ogasawara

Beilstein J. Org. Chem. 2026, 22, 568–574, doi:10.3762/bjoc.22.42

• benzene at the indicated temperature in the presence of an appropriate chiral Mo-precatalyst (10 mol %), which was generated in situ from the Mo-precursor, (pyrrolyl)2Mo(=CHCMe2Ph)(=N-C6H3-2,6-iPr2) [36], and an axially chiral biphenol ligand. The chiral Mo/(R)-L1 precatalyst [21] facilitated the

Get a better glimpse on sequential photoreactions of trisnorbornadienes with ¹⁹F NMR spectroscopy

• Julian Felix Maria Hebborn,
• Ben Eric Merten,
• Thomas Paululat and
• Heiko Ihmels

Beilstein J. Org. Chem. 2026, 22, 527–534, doi:10.3762/bjoc.22.38

• trisquadricyclane. Even though the reaction can be monitored by photometry or by in situ 1H NMR spectroscopy, unambiguous assignment of the distinct intermediate mono- and bisquadricyclanes was not possible because of signal overlap. In contrast, this shortcoming is circumvented with in situ 19F NMR-spectroscopic

• lines, 1H NMR spectroscopy is a very useful method to follow the photoreaction, ideally upon direct irradiation in the NMR probehead (in situ NMR), because it potentially enables accurate structure elucidation. But even though this method may enable the accurate monitoring of a stepwise photochromic

• reaction of multichromophores in some cases [36][37], significant overlap of NMR signals often interferes with the detailed identification of separate components. Therefore, we proposed that the analysis of the photoreaction of a fluorinated starting material with in situ 19F NMR spectroscopy may add a

Modern synthetic pathways towards eribulin and its subunits

• Sebastian Dominik Graf

Beilstein J. Org. Chem. 2026, 22, 495–526, doi:10.3762/bjoc.22.37

• from Scheme 26 and Scheme 27 were coupled via Corey–Chaykovsky reaction and the so-obtained epoxide was treated with m-CPBA yielding sulfone 251 as the major diastereomer (Scheme 28). Regioselective deprotonation and epoxide opening with in situ-formed Ti(III)-species from Cp2TiCl2 and zinc led to the

Cone p-aminocalix[4]arenes enriched with ‘clickable’ alkyne or azide functionalities

• Ilia Korniltsev,
• Vasily Bazhenov,
• Alexander Gorbunov,
• Dmitry Cheshkov,
• Stanislav Bezzubov,
• Vladimir Kovalev and
• Ivan Vatsouro

Beilstein J. Org. Chem. 2026, 22, 399–415, doi:10.3762/bjoc.22.28

• commercially available lithium bis(trimethylsilyl)amide (LiHMDS), but the latter was found inconvenient for routine syntheses due to high moisture sensitivity which prevented reproducibility of the reaction conditions. To overcome this difficulty, the LiHMDS solution was instead prepared in situ by reacting

Recent advances in the cleavage of non-activated amides

• Eun-Sol Choi and
• Hyo-Jun Lee

Beilstein J. Org. Chem. 2026, 22, 352–369, doi:10.3762/bjoc.22.23

• distinct mechanistic pathways, a simplified version of which is described herein. The active catalytic species, palladium(II) pivalate, is formed in situ from Pd(COD)Cl₂ through ligand exchange with pivalic acid (PivOH). Complexation of this active Pd(II) species with ligand L1 and the amide substrate

• analogous to that proposed in Scheme 12. Halogenation In 2022, Szostak and Chen developed an elegant and highly chemoselective transamidation of non-activated tertiary amides via in-situ generation of an acyl iodide intermediate 121 (Scheme 19) [67]. In the presence of a catalytic amount of KI and one

• . Bioactive molecule-derived amides with complex structures smoothly underwent acyl iodide generation, thereby furnishing the products 132, 133, and 134 in 85%, 82%, and 88% yield, respectively, via in-situ amidation with aniline. The scope of amine nucleophiles was broad as well. Anilines, primary amines

Synthesis of tricyclic fused pyrrolidine nitroxides from 2-alkynylpyrrolidine-1-oxyls

• Mark M. Gulman,
• Yuliya F. Polienko,
• Sofia Yu. Trakhininа,
• Yuri V. Gatilov,
• Tatyana V. Rybalova,
• Sergey A. Dobrynin and
• Igor A. Kirilyuk

Beilstein J. Org. Chem. 2026, 22, 344–351, doi:10.3762/bjoc.22.22

• corresponding alkynylmagnesium bromides to nitrone 1 [20]. Radicals 2d and 2e were prepared in analogy to the known procedure using trimethylsilylacetylene and benzyl propargyl ether as the terminal alkynes (Scheme 1). Nitrone 1 was treated with a 10-fold excess of alkynylmagnesium bromide prepared in situ via

Spirobarbiturates with a pyrrolizidine moiety: synthesis, structure and biological evaluation

• Arthur A. Puzyrkov,
• Andrew S. Drachuk,
• Ekaterina A. Popova,
• Alexander V. Stepakov and
• Vitali M. Boitsov

Beilstein J. Org. Chem. 2026, 22, 274–288, doi:10.3762/bjoc.22.20

• azabicyclo[3.1.0]hexane and cyclopropa[a]pyrrolizine moieties can be synthesized via 1,3-dipolar cycloaddition between cyclopropene derivatives and azomethine ylides generated in situ from alloxan and α-amino acids [43]. In [43], a mechanism was proposed for the formation of azomethine ylides from alloxan

• [a]pyrolizines as well as spiroazabicyclo[3.1.0]hexanes are readily available from cyclopropenes and azomethine ylides [47][48][49] and some adducts inhibited cancer cell growth in vitro [50][51]. The first reported synthesis of spirobarbiturates employing azomethine ylides (generated in situ from

• ylide, which is generated in situ by condensation of alloxan and ʟ-proline, can react with maleimides to give spirobarbiturate-pyrrolo[3,4-a]pyrrolizidine-1,3-diones in moderate to good yields. We have demonstrated the possibility of using a wide range of N-substituted maleimides as dipolarophiles. All

A mild and atom-efficient four-component cascade strategy for the construction of biologically relevant 4-hydroxyquinolin-2(1H)-one derivatives

• Dmitrii A. Grishin,
• Kseniia I. Sharkovskaia,
• Ilya G. Kolmakov,
• Daria A. Ipatova,
• Rostislav A. Petrov,
• Nikolai D. Dagaev,
• Dmitry A. Skvortsov,
• Maria G. Khrenova,
• Valeriy V. Andreychev,
• Sergei A. Evteev,
• Yan A. Ivanenkov,
• Roman L. Antipin,
• Olga А. Dontsova and
• Elena K. Beloglazkina

Beilstein J. Org. Chem. 2026, 22, 244–256, doi:10.3762/bjoc.22.18

• and selective synthesis of previously inaccessible 4-hydroxyquinolin-2(1H)-one derivatives. Utilizing readily available 6-halo-4-hydroxyquinolinones, aromatic aldehydes, Meldrum’s acid, and alcohols under ʟ-proline catalysis, the reaction proceeds via in situ formation of arylidene-substituted Meldrum

• presumably proceed through in situ formation of the Michael acceptor from the condensation of an aromatic aldehyde with Meldrum’s acid, followed by decarboxylation and lactonization to yield the pyranoquinolinedione products (Scheme 1). We hypothesized that employing an alcohol as solvent could induce

• the desired products. Employing in situ acyl chloride formation from acids 11a–c in the presence of a slight excess of cyclohexanol led to pyranoquinoline 14 formation instead of the open-chain ester. The same cyclic product 14 was obtained via Fischer–Speier esterification with a small excess of

Circumventing Mukaiyama oxidation: selective S–O bond formation via sulfenamide–alcohol coupling

• Guoling Huang,
• Huarui Zhu,
• Shuting Zhou,
• Wanlin Zheng,
• Fangpeng Liang,
• Zhibo Zhao,
• Yifei Chen and
• Xunbo Lu

Beilstein J. Org. Chem. 2026, 22, 158–166, doi:10.3762/bjoc.22.9

• limitations, we envisioned that highly electrophilic sulfilimidoyl intermediates – generated in situ via N-halosuccinimide-mediated oxidative activation of sulfenamides – could be directly intercepted by alcohols under basic conditions to furnish structurally diverse sulfinimidate esters [32]. In particular

Total synthesis of natural products based on hydrogenation of aromatic rings

• Haoxiang Wu and
• Xiangbing Qi

Beilstein J. Org. Chem. 2026, 22, 88–122, doi:10.3762/bjoc.22.4

• new stereocenters, producing architecturally complex 6–5 fused ring systems. The key points lie in the utility of a chiral homogeneous ruthenium-N-heterocyclic carbene complex, as well as an in-situ activated rhodium catalyst. In 2022, Bach and co-workers reported a modular approach for the highly

• between 179 and the dicarbonyl compound, followed by in-situ oxidation of the resulting intermediate 180 to afford compound 181 in a one-pot sequence. At this step, the key challenge was to obtain (−)-finerenone with high enantioselectivity through asymmetric hydrogenation of intermediate 181 (Scheme 25

Advances in Zr-mediated radical transformations and applications to total synthesis

• Hiroshige Ogawa and
• Hugh Nakamura

Beilstein J. Org. Chem. 2026, 22, 71–87, doi:10.3762/bjoc.22.3

• yields. The catalytic system was further extended to the borylation of alkyl chlorides. (Scheme 7B). Under XAT conditions with B2(cat)2, the in situ-generated alkyl radical was trapped by diborane compound to form intermediate 39, which was subsequently converted into pinacol boronate 40 upon treatment

Reactivity umpolung of the cycloheptatriene core in hexa(methoxycarbonyl)cycloheptatriene

• Dmitry N. Platonov,
• Alexander Yu. Belyy,
• Rinat F. Salikov,
• Kirill S. Erokhin and
• Yury V. Tomilov

Beilstein J. Org. Chem. 2026, 22, 64–70, doi:10.3762/bjoc.22.2

• contraposes the expected and the unexpected in terms of polarity in either reactions or synthetic strategies (Figure 1). Most effective reactions within this concept involve the in situ generation of a species exhibiting reversed polarity and the original group is reestablished at later reaction stages [2

Synthesis and applications of alkenyl chlorides (vinyl chlorides): a review

• Daniel S. Müller

Beilstein J. Org. Chem. 2026, 22, 1–63, doi:10.3762/bjoc.22.1

• HIV-1 non-nucleoside reverse transcriptase inhibitor, they aimed to improve the preparation of compound 19, whose yield had previously been limited to 22% following a similar route. They noticed that in situ-generated species such as POCl3 or HCl triggered ring opening of dichloride 15 to produce a

• reaction in which an in situ-generated Vilsmeier reagent converted aryl ketones bearing electron-donating substituents at the ortho- or para-position into alkenyl chlorides [68]. The reported yields corresponded to crude products and therefore do not reflect isolated yields of pure compounds (Scheme 15

• is generated in situ and likely present only in trace amounts. All our attempts to accelerate the reaction through addition of various mono- and bidentate phosphorus ligands were unsuccessful. A similar trend was observed with NEt3, which afforded optimal yields at 20–30 mol % loading (not shown

One-pot synthesis of ethylmaltol from maltol

• Immanuel Plangger,
• Marcel Jenny,
• Gregor Plangger and
• Thomas Magauer

Beilstein J. Org. Chem. 2025, 21, 2755–2760, doi:10.3762/bjoc.21.212

• amounts of sodium hydride and n-butyllithium followed by trapping with methyl iodide afforded mostly recovered maltol (2, 75%) along with traces of desired ethylmaltol (1, Table 1, entry 1). We attributed the low conversion rate to the poor solubility of the in situ-generated sodium maltolate and instead

• procedure, maltol (2) was deprotonated with sodium hydride followed by treatment with TBSCl to in situ obtain silyl ether 8e, which was subsequently deprotonated with LiHMDS and C-methylated with methyl iodide at 0 °C. Addition of aqueous hydrochloric acid enabled silyl deprotection to ethylmaltol (1) in 52

Tandem hydrothiocyanation/cyclization of CF₃-iminopropargyl alcohols with NaSCN in the presence of AcOH

• Ruslan S. Shulgin,
• Ol’ga G. Volostnykh,
• Anton V. Stepanov,
• Igor’ A. Ushakov,
• Alexander V. Vashchenko and
• Olesya A. Shemyakina

Beilstein J. Org. Chem. 2025, 21, 2694–2702, doi:10.3762/bjoc.21.207

• hydrothiocyanation of ynones using KSCN in AcOH at 70 °C. They also demonstrated that the adducts of ynones are readily cyclized in situ via a second thiocyanation to form thiazine-2-thiones at a slightly higher temperature and for a longer time. Meanwhile the reaction with ynamides led to decyanative amido

Recent advancements in the synthesis of Veratrum alkaloids

• Morwenna Mögel,
• David Berger and
• Philipp Heretsch

Beilstein J. Org. Chem. 2025, 21, 2657–2693, doi:10.3762/bjoc.21.206

• , vinylogous Mannich reaction of the in situ-generated aldimine condensation product of 49 and amine 50 with trimethylsiloxyfuran 51 generated secondary amine 52 in a diastereomeric ratio of 10:1. To close the piperidine, which is to become the F-ring, six steps were carried out: 1,4-reduction of the

• to abstract the chloride of the [Rh(cod)Cl]2 catalyst, forming a cationic rhodium complex in situ, while diethyl fumarate acted as a hydrogen acceptor. Double bond isomerization, ketone reduction and deprotection of 73 furnished veratramine (13). This Diels–Alder strategy concluded the synthesis of

Thiazolidinones: novel insights from microwave synthesis, computational studies, and potentially bioactive hybrids

• Luan A. Martinho,
• Victor H. J. G. Praciano,
• Guilherme D. R. Matos,
• Claudia C. Gatto and
• Carlos Kleber Z. Andrade

Beilstein J. Org. Chem. 2025, 21, 2618–2636, doi:10.3762/bjoc.21.203

• mechanism involving the participation of ethylenediamine (EDA) is shown in Scheme 4. Initially, the basic EDA is protonated by acetic acid (AcOH), forming ethylenediamine diacetate (EDDA) in situ. The use of EDDA has been reported as a highly efficient catalyst for the synthesis of 5-arylidene-2,4

• % of EDDA at 80 °C for 30 minutes under microwave irradiation. Despite this later methodology looks very efficient, the method reported here enables the in situ generation of the catalyst, allowing for an expanded reaction scope with 2,4-TZD derivatives (23 examples) and also proving effective for

Recent advances in total synthesis of illisimonin A

• Juan Huang and
• Ming Yang

Beilstein J. Org. Chem. 2025, 21, 2571–2583, doi:10.3762/bjoc.21.199

• , obtained as a 1.7:1 mixture of diastereomers after protection of one of the carbonyl groups in 19 as enol ether with BOMCl. A silyl-tethered intramolecular Diels–Alder reaction of the in situ generated 22 constructed the tricyclo[5.2.1.01,5]decane core bearing a cis-pentalene unit, yielding compound 23

• then converted to vinyl iodide 26 via hydrazine formation followed by iodination using Barton’s method. Subsequent Bouvealt aldehyde synthesis and in situ reduction delivered allylic alcohol 27. Epoxidation of 27 with m-CPBA afforded the rearrangement precursor 28. Protonic acid-promoted semipinacol

• deprotection and oxidation of the secondary alcohol, yielded the cyclization precursor 35. A B(C6F5)3-catalyzed tandem Nazarov/ene cyclization of 35 provided the key spirocyclic intermediate 37. The tertiary alcohol was protected in situ with TESOTf to suppress retro-aldol side reactions. Notably, prior TES

Total syntheses of highly oxidative Ryania diterpenoids facilitated by innovations in synthetic strategies

• Zhi-Qi Cao,
• Jin-Bao Qiao and
• Yu-Ming Zhao

Beilstein J. Org. Chem. 2025, 21, 2553–2570, doi:10.3762/bjoc.21.198

• reported the first total synthesis of ryanodine from ryanodol [47] (Scheme 5). Their strategy utilized a novel boronate protecting group to mask the four syn-oriented hydroxy groups. A critical step was the in-situ generation of the pyrrole-2-carboxylate unit from a glycine ester and 1,3-bis(dimethylamino

Ni-promoted reductive cyclization cascade enables a total synthesis of (+)-aglacin B

• Si-Chen Yao,
• Jing-Si Cao,
• Jian Xiao,
• Ya-Wen Wang and
• Yu Peng

Beilstein J. Org. Chem. 2025, 21, 2548–2552, doi:10.3762/bjoc.21.197

• asymmetric conjugate addition was carried out [20][21]. The in situ generated aryl–copper(I) species was obtained under the action of CuBr·Me2S with Grignard reagent 8, and then added to a THF solution of the α,β-unsaturated acyl oxazolidinone 7 at −48 °C. This reaction demonstrated an excellent

Rapid access to the core of malayamycin A by intramolecular dipolar cycloaddition

• Yilin Liu,
• Yuchen Yang,
• Chen Yang,
• Sha-Hua Huang,
• Jian Jin and
• Ran Hong

Beilstein J. Org. Chem. 2025, 21, 2542–2547, doi:10.3762/bjoc.21.196

• NaClO·5H2O, the in situ-generated nitrile N-oxide immediately underwent intramolecular dipolar cycloaddition to deliver the cycloadducts 18 in good yield as a mixture of two inseparable diastereoisomers. This telescoped step was readily performed on a gram scale without interrupted purification of the

Isoorotamide-based peptide nucleic acid nucleobases with extended linkers aimed at distal base recognition of adenosine in double helical RNA

• Grant D. Walby,
• Brandon R. Tessier,
• Tristan L. Mabee,
• Jennah M. Hoke,
• Hallie M. Bleam,
• Angelina Giglio-Tos,
• Emily E. Harding,
• Vladislavs Baskevics,
• Martins Katkevics,
• Eriks Rozners and
• James A. MacKay

Beilstein J. Org. Chem. 2025, 21, 2513–2523, doi:10.3762/bjoc.21.193

• synthesis of aniline 10 and carboxylic acid 13. To access 10, the isoorotic acid derivative 6 was treated with oxalyl chloride to form the corresponding acyl chloride in situ which was then slowly added to a solution of m-phenylenediamine (9) to afford the target aniline in 62% yield (Scheme 2). Slow

Assembly strategy for thieno[3,2-b]thiophenes via a disulfide intermediate derived from 3-nitrothiophene-2,5-dicarboxylate

• Roman A. Irgashev

Beilstein J. Org. Chem. 2025, 21, 2489–2497, doi:10.3762/bjoc.21.191

• of the S–S bond in disulfide 3 followed by in situ alkylation was investigated for the one-pot synthesis of 3-alkylthio-substituted thiophene-2,5-dicarboxylates. We first focused our efforts on optimizing the conditions of this two-step process to determine suitable reducing agents and solvents

Palladium-catalyzed regioselective C1-selective nitration of carbazoles

• Vikash Kumar,
• Jyothis Dharaniyedath,
• Aiswarya T P,
• Sk Ariyan,
• Chitrothu Venkatesh and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2025, 21, 2479–2488, doi:10.3762/bjoc.21.190

• a six-membered palladacycle intermediate 9. Subsequent reaction with in situ-generated HNO3 facilitates nitro group incorporation to form the C1-nitrated carbazole product 2a and regeneration of the active palladium catalyst 7, thereby completing the catalytic cycle. Conclusion In summary, we have

Transformation of the cyclohexane ring to the cyclopentane fragment of biologically active compounds

• Natalya Akhmetdinova,
• Ilgiz Biktagirov and
• Liliya Kh. Faizullina

Beilstein J. Org. Chem. 2025, 21, 2416–2446, doi:10.3762/bjoc.21.185

• have been little studied, and are of interest to synthetic chemists. Thus, the interaction of (−)-metaphanine (70) with ammonia in CH3OH at room temperature led to the in situ formation of imine 72, which, as a result of an intramolecular aza-benzilic acid-type rearrangement, was converted in more than