Unusual highly diastereoselective Rh(II)-catalyzed dimerization of 3-diazo-2-arylidenesuccinimides provides access to a new dibenzazulene scaffold

• Anastasia Vepreva,
• Alexander S. Bunev,
• Andrey Yu. Kudinov,
• Grigory Kantin,
• Mikhail Krasavin and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2022, 18, 533–538, doi:10.3762/bjoc.18.55

• Federal University, Kaliningrad 236041, Russian Federation 10.3762/bjoc.18.55 Abstract Formation of unusual unsymmetrical dimers or/and indenes via Rh2(esp)2-catalyzed decomposition of 3-diazo-2-arylidenesuccinimides has been investigated. The reaction proceeded under mild conditions, and its result was

• against the A549 human lung adenocarcinoma cell line while N-aryl analogs were non-cytotoxic. Keywords: diazo arylidene succinimides; dibenzoazulenodipyrroles; indenopyrroles; Rh2(esp)2-catalyzed decomposition; unsymmetrical dimers; Introduction 3-Diazo-2-arylidenesuccinimides 1 (DAS) are heterocyclic

• diazocarbonyl compounds [5]. The close spatial arrangement of the conjugate aryl fragment and the diazo group in the DAS molecule favors both intramolecular and intermolecular cyclizations involving the arylidene group. Thus, under catalytic decomposition, DAS containing a 2-pyridyl or 2-hydroxyaryl substituent

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• -naphthoquinone (18) were obtained in 80% yield with a 75:25 ratio, respectively (Scheme 2, method A). In the methylation reaction using methyl radicals generated by the redox decomposition of H2O2 in DMSO solution, compounds 10 and 18 were obtained in an overall yield of 80–90% with a 77:23 ratio, respectively

• (Scheme 2, method B). Finally, the use of H2O2 thermal decomposition in acetone with catalytic methanesulfonic acid, led to compounds 10 and 18 in 47% yield with 86:14 ratio (Scheme 2, method C). In all cases, the monomethylation was not selective and even at partial conversions of naphthoquinone

Borylated norbornadiene derivatives: Synthesis and application in Pd-catalyzed Suzuki–Miyaura coupling reactions

• Robin Schulte and
• Heiko Ihmels

Beilstein J. Org. Chem. 2022, 18, 368–373, doi:10.3762/bjoc.18.41

• all, as neither the reaction of 2a with NaIO4 and hydrochloric acid, nor the reaction of 2a with LiOH and subsequent addition of acid (ammonium chloride, hydrochloric acid) gave the desired boronic acid, but led to decomposition, instead. Obviously, the 2-borylated norbornadiene derivatives are acid

Amamistatins isolated from Nocardia altamirensis

• Till Steinmetz,
• Wolf Hiller and
• Markus Nett

Beilstein J. Org. Chem. 2022, 18, 360–367, doi:10.3762/bjoc.18.40

• been reported before. The isolated metabolite 5 represents the previously described siderophore amamistatin B [7], while compound 6 was before only known as a decomposition product of a synthetically prepared obafluorin derivative [8]. Results and Discussion To induce siderophore biosynthesis in N

Synthesis of piperidine and pyrrolidine derivatives by electroreductive cyclization of imine with terminal dihaloalkanes in a flow microreactor

• Yuki Naito,
• Naoki Shida and
• Mahito Atobe

Beilstein J. Org. Chem. 2022, 18, 350–359, doi:10.3762/bjoc.18.39

• electrodes and subjected to the electrolytic reaction. Tetrahydrofuran (THF), which is easily oxidized, was employed as the electrolytic solvent, so the reaction at the anode (counter electrode) is thought to be preferentially caused by the oxidative decomposition of THF, and the re-oxidation of the cathodic

Regioselectivity of the S_EAr-based cyclizations and S_EAr-terminated annulations of 3,5-unsubstituted, 4-substituted indoles

• Jonali Das and
• Sajal Kumar Das

Beilstein J. Org. Chem. 2022, 18, 293–302, doi:10.3762/bjoc.18.33

• this methodology to related substrates with free indolyl NH as such reactions resulted into a complex mixture (not shown here), possibly due to the decomposition of the substrates. Nevertheless, the same regioselectivity was observed when the FC-acylation of N-protected 3-(4-indolyl)propanoic acids 28g

Flow synthesis of oxadiazoles coupled with sequential in-line extraction and chromatography

• Kian Donnelly and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 232–239, doi:10.3762/bjoc.18.27

• in a slight decrease in yield, and an increase in decomposition was observed with an increase in temperature despite the short residence times (entries 6 and 7, Table 2). The lack of solubility of the hydrazone substrates limited options with regards to variation in reaction solvent, with adequate

• prove useful for accessing small quantities of medicinally interesting BCP-1,3,4-oxadiazole compounds for biological testing. Additionally, the reaction of 1,3-substituted isoxazole 1m under these conditions was investigated. Despite high degrees of decomposition, it was possible to isolate the desired

Chemoselective N-acylation of indoles using thioesters as acyl source

• Tianri Du,
• Xiangmu Wei,
• Honghong Xu,
• Xin Zhang,
• Ruiru Fang,
• Zheng Yuan,
• Zhi Liang and
• Yahui Li

Beilstein J. Org. Chem. 2022, 18, 89–94, doi:10.3762/bjoc.18.9

• , Scheme 3). The results indicate that this N-acylation reaction of indole has great potential in practical synthesis. Some control experiments were conducted to explore the reaction mechanism of this transformation (Scheme 4). When S-methyl decanethioate (2i) was adopted without Cs2CO3, no decomposition

A two-phase bromination process using tetraalkylammonium hydroxide for the practical synthesis of α-bromolactones from lactones

• Yuki Yamamoto,
• Akihiro Tabuchi,
• Kazumi Hosono,
• Takanori Ochi,
• Kento Yamazaki,
• Shintaro Kodama,
• Akihiro Nomoto and
• Akiya Ogawa

Beilstein J. Org. Chem. 2021, 17, 2906–2914, doi:10.3762/bjoc.17.198

• in a dramatically lower yield of 3a (8%), most likely because 3a is unstable to base at room temperature and may decompose or polymerize (see Supporting Information File 1). To avoid decomposition or polymerization, 3a produced in situ by the intramolecular cyclization of 2a should be separated

Synthesis of new pyrazolo[1,2,3]triazines by cyclative cleavage of pyrazolyltriazenes

• Nicolai Wippert,
• Martin Nieger,
• Claudine Herlan,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2021, 17, 2773–2780, doi:10.3762/bjoc.17.187

• transformations without decomposition [37][38][39]. In the herein presented study, we apply the cyclative cleavage reaction to pyrazolyltriazenes instead of aryltriazenes, which results in the synthesis of diverse pyrazolo[3,4-d][1,2,3]-3H-triazine derivatives 5. Results and Discussion According to the literature

• of the target compounds of class 5 were chosen as they were available in sufficient amounts and showed no decomposition during storage and dilution in DMSO. Also, most of the intermediates showed no reduction of cell viability; however, compounds 9b, 12b,c, 13a,b, and 13f–h showed some cytotoxic

Ligand-dependent stereoselective Suzuki–Miyaura cross-coupling reactions of β-enamido triflates

• Tomáš Chvojka,
• Athanasios Markos,
• Svatava Voltrová,
• Radek Pohl and
• Petr Beier

Beilstein J. Org. Chem. 2021, 17, 2657–2662, doi:10.3762/bjoc.17.179

• study. Substituted phenylboronic acids and vinyl triflates led to the formation of enamides 2 with high stereoselectivity and in good to high NMR yields (Scheme 2). However, isolated yields were found to be lower due to the decomposition of the formed enamides 2 during column chromatography on silica

• -trifluoromethylphenyl group which gave enamides 3da (2da/3da, 20:80) and 3dd (2dd/3dd, <1:99). It is worth mentioning that the reaction of vinyl triflate 1c with 3-methoxyphenylboronic acid led to full decomposition of the starting material. The stereochemistry of the double bond in compounds 2 and 3 was determined by

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

• Robin Klintworth,
• Garreth L. Morgans,
• Stefania M. Scalzullo,
• Charles B. de Koning,
• Willem A. L. van Otterlo and
• Joseph P. Michael

Beilstein J. Org. Chem. 2021, 17, 2543–2552, doi:10.3762/bjoc.17.170

• , methanesulfonic acid, boron trifluoride etherate) resulted in decomposition if the reactions were left at room temperature overnight, or within ten minutes if the temperature was raised, even to 50 °C (Table 1, entries 6–13). The enaminone appeared to be protonated at room temperature, presumably on the oxygen

• was heated, in which case decomposition took place (Table 1, entry 15). Solutions of 15a in dichloromethane also decomposed rapidly when treated with aluminum trichloride or boron trifluoride at 50 °C, although no reaction was apparent at room temperature even after 18 hours (Table 1, entries 16–19

• in a good yield of 84%, although prolonged exposure even at ambient temperature led to decomposition (Table 1, entries 22 and 23). However, the most successful microwave-assisted reactions took place with the somewhat less acidic silica gel (200–400 mesh) as the promotor [45]. Mixing a solution of

Synthesis of new substituted 7,12-dihydro-6,12-methanodibenzo[c,f]azocine-5-carboxylic acids containing a tetracyclic tetrahydroisoquinoline core structure

• Agnieszka Grajewska,
• Maria Chrzanowska and
• Wiktoria Adamska

Beilstein J. Org. Chem. 2021, 17, 2511–2519, doi:10.3762/bjoc.17.168

• 5a, glyoxylic acid hydrate (4), and O-benzylvanilin-derived aminoacetal 3e (Scheme 4), when treated with 20% HCl or 70% HClO4 gave a colored complex mixture of decomposition products, probably due to the hydrolysis of the benzyl ether. Iwakuma et al. [15] reported the synthesis of 1,2,3,4

Copper-catalyzed monoselective C–H amination of ferrocenes with alkylamines

• Zhen-Sheng Jia,
• Qiang Yue,
• Ya Li,
• Xue-Tao Xu,
• Kun Zhang and
• Bing-Feng Shi

Beilstein J. Org. Chem. 2021, 17, 2488–2495, doi:10.3762/bjoc.17.165

• metals. Second, both amines and the resulting aminated products could coordinate with metal catalysts and cause the deactivation of catalysts. Besides, high reaction temperature could lead to a mixture of byproducts or the decomposition of the ferrocene products. Herein, we described a Cu-catalyzed

• decomposition of the aminated product 3a was observed. Consequently, we exclusively evaluated the reaction temperature and time (Table 1, entries 13–16). To our delight, 3a could be obtained in 80% yield under relatively lower temperature (80 °C) and shorter time (4 hours). To note, this reaction showed

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• decomposition temperature, which was over 350 °C. The polymers 50, 54, and 56 exhibited absorption bands in the 400–450 nm range due to π–π* transition. However, polymer 52, which contains a benzothiadiazole ring was an exception, as it showed a highly red-shifted band at 550 nm. The important feature of these

Preparation of mono-substituted malonic acid half oxyesters (SMAHOs)

• Tania Xavier,
• Sylvie Condon,
• Christophe Pichon,
• Erwan Le Gall and
• Marc Presset

Beilstein J. Org. Chem. 2021, 17, 2085–2094, doi:10.3762/bjoc.17.135

• temperature of addition was also an important parameter and we found that an initial cooling to −15 °C was optimal (Table 4, entries 3–5), presumably by limiting the decomposition of the malonic acid derivative. We also studied the influence of the stoichiometry of the different reagents (Table 4, entries 6–9

Towards new NIR dyes for free radical photopolymerization processes

• Haifaa Mokbel,
• Guillaume Noirbent,
• Didier Gigmes,
• Frédéric Dumur and
• Jacques Lalevée

Beilstein J. Org. Chem. 2021, 17, 2067–2076, doi:10.3762/bjoc.17.133

• polymerization is much more efficient when borate is used as the counter anion with both a higher polymerization rate and FC. The results show that the formation of initiating radicals can be related to the decomposition of the borate moiety. This can be explained by the fact that the borate counter ion can act

A study on selective transformation of norbornadiene into fluorinated cyclopentane-fused isoxazolines

• Zsanett Benke,
• Attila M. Remete and
• Loránd Kiss

Beilstein J. Org. Chem. 2021, 17, 2051–2066, doi:10.3762/bjoc.17.132

• catalyst HG-2 was used (Table 1, entries 1 and 2), decomposition of the catalyst with NaHCO3 in aqueous MeOH during workup improved the yield. Therefore, catalyst decomposition was incorporated into the workup procedure of all other CM reactions. The outcome of the reaction between (±)-4 and 7c was

Development of N-F fluorinating agents and their fluorinations: Historical perspective

• Teruo Umemoto,
• Yuhao Yang and
• Gerald B. Hammond

Beilstein J. Org. Chem. 2021, 17, 1752–1813, doi:10.3762/bjoc.17.123

• decomposition process that is observed with N-F reagents that have an α-proton and occurs under strong base conditions. 1-11. Perfluoro[N-fluoro-N-(4-pyridyl)methanesulfonamide] In 1990, Banks and co-worker reported perfluoro[N-fluoro-N-(4-pyridyl)methanesulfonamide] (11-2) [54]. Starting from

• crystalline solid with a high decomposition point of ca. 170 °C. The bisOTf salt 22-1a, bisBF4 22-1d, bisSbF6 22-1e, and bisPF6 22-1f are easy-to-handle because they are non-hygroscopic and stable crystals. As shown in Figure 6, 22-1a,d,e mediated a quantitative conversion of anisole to isomers of

• carbanions [90]. The precursor 27-1, which was prepared in a three step protocol from saccharin, was fluorinated with FClO3 to give 27-2 in good yield (Scheme 60). Direct fluorination of 27-1 with 10% F2/N2 had failed because of decomposition. Various ketone enolates were successfully fluorinated with

Electron-rich triarylphosphines as nucleophilic catalysts for oxa-Michael reactions

• Susanne M. Fischer,
• Simon Renner,
• A. Daniel Boese and
• Christian Slugovc

Beilstein J. Org. Chem. 2021, 17, 1689–1697, doi:10.3762/bjoc.17.117

• formation of the corresponding phosphine oxide derivative as the only decomposition product was observed. The results, shown in Figure 3, reveal that the oxidation stability is decreasing in the order TPP > MMTPP > TMTPP, which is in line with electrochemical studies showing a decrease of the oxidation

Breaking paracyclophane: the unexpected formation of non-symmetric disubstituted nitro[2.2]metaparacyclophanes

• Suraj Patel,
• Tyson N. Dais,
• Paul G. Plieger and
• Gareth J. Rowlands

Beilstein J. Org. Chem. 2021, 17, 1518–1526, doi:10.3762/bjoc.17.109

• suggesting rearrangement does not occur. Reaction of the electron-rich 4-hydroxy[2.2]paracyclophane led to decomposition while the electron-poor derivatives barely reacted. Treatment of [2.2]paracyclophane (1) with various acids (nitric, sulfuric, perchloric, and acetic acid) led to differing results

Synthesis of 1-indolyl-3,5,8-substituted γ-carbolines: one-pot solvent-free protocol and biological evaluation

• Premansh Dudhe,
• Mena Asha Krishnan,
• Kratika Yadav,
• Diptendu Roy,
• Krishnan Venkatasubbaiah,
• Biswarup Pathak and
• Venkatesh Chelvam

Beilstein J. Org. Chem. 2021, 17, 1453–1463, doi:10.3762/bjoc.17.101

• decomposition of N-pyridylbenzotriazoles. Later, the reaction conditions were modified to make this reaction more versatile and operationally simple such as by the use of microwave irradiation [12]. Meanwhile, the Fischer indole synthesis was successfully extended for the synthesis of significant biologically

• -indole-2-carbaldehyde (1h), impeded the conversion to γ-carboline 3ha (structure not shown) due to probable decomposition and decrease in nucleophilicity at the 3-position in substrate 1h. Plausible mechanism for the formation of γ-carbolines The probable mechanistic explanation (Scheme 3) for the

Total synthesis of ent-pavettamine

• Memory Zimuwandeyi,
• Manuel A. Fernandes,
• Amanda L. Rousseau and
• Moira L. Bode

Beilstein J. Org. Chem. 2021, 17, 1440–1446, doi:10.3762/bjoc.17.99

• tosylate under basic conditions affording 24 in a yield of 83%. The displacement of the tosyl group with an azide whilst heating the reaction at 80 °C allowed for the isolation of azide 25 in a good yield of 75%. Heating at higher temperatures resulted in product decomposition. Hydrogenation of the azide

• neutralize the TFA salt to obtain the free amine were unsuccessful, most often resulting in product decomposition. Also the attempted product purification by recrystallization from methanol did not improve the purity of the product. Spectroscopic data of the synthesized ent-pavettamine and the pavettamine

Icilio Guareschi and his amazing “1897 reaction”

• Gian Cesare Tron,
• Alberto Minassi,
• Giovanni Sorba,
• Mara Fausone and
• Giovanni Appendino

Beilstein J. Org. Chem. 2021, 17, 1335–1351, doi:10.3762/bjoc.17.93

• and can interfere with the color reaction and tests used to detect plant poisons in forensic investigations. There is currently a resurrection of interest in nitrogenous small molecules associated with corpse decomposition since the profile of these compounds can be useful to assess postmortem

Photoinduced post-modification of graphitic carbon nitride-embedded hydrogels: synthesis of 'hydrophobic hydrogels' and pore substructuring

• Cansu Esen and
• Baris Kumru

Beilstein J. Org. Chem. 2021, 17, 1323–1334, doi:10.3762/bjoc.17.92

• decomposition starting from 307 °C and ending up with 8.44% total weight at 800 °C, at first place. HGCM-PAA maintained thermal stability up to 305 °C with 8.4% mass change and resulted in 12.6% total weight whereas HGCM-PAAM was stable up to 250 °C with 7% mass change ending up with 13.4% total weight. At last