Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• view. Some recent examples are cited herein. Postconsumer PET was depolymerised in the melt (at 250 °C) using DEG and Ca/Zn stearate as catalyst, and the product mixture was used in situ in conjunction with bis(2-ethylhexyl)phthalate and the same metal promoter for the production of flexible poly(vinyl

Breakdown of 3-(allylsulfonio)propanoates in bacteria from the Roseobacter group yields garlic oil constituents

• Anuj Kumar Chhalodia and
• Jeroen S. Dickschat

Beilstein J. Org. Chem. 2021, 17, 569–580, doi:10.3762/bjoc.17.51

• antibacterial, antifungal, antioxidant, anti-inflammatory, and anticancer effects [4]. Later on, also heterocyclic compounds including 2-vinyl-4H-1,3-dithiine (6) and 3-vinyl-3,4-dihydro-1,2-dithiine (7) were discovered [5]. The formation of these volatile sulfur compounds starts from alliin (9) [6], a non

• chromatographic (GC) analysis by an unknown mechanism [9] (7 was confused with its double bond regioisomer 3-vinyl-3,6-dihydro-1,2-dithiine (8) in this study [5]). Under these conditions the formation of the heterocyclic disulfides 7 and 8 may not involve a dimerization of 14, as a [4 + 2] cycloaddition is not a

Menthyl esterification allows chiral resolution for the synthesis of artificial glutamate analogs

• Kenji Morokuma,
• Shuntaro Tsukamoto,
• Kyosuke Mori,
• Kei Miyako,
• Ryuichi Sakai,
• Raku Irie and
• Masato Oikawa

Beilstein J. Org. Chem. 2021, 17, 540–550, doi:10.3762/bjoc.17.48

• bromide (11) and TFANH2, was reacted in the presence of Cs2CO3 in DMF. We next examined the construction of the characteristic eight-membered ring using vinyl acetate and Zhan catalyst-1B (14, see Figure 5 for the structure) [14]. The construction of such a medium-sized ring is generally highly

• challenging [15][16], and this was also the case for (rac)-13, since we first obtained the incomplete triene intermediate (rac)-15 as a result of only ring-opening metathesis (ROM) mediated by the Fischer carbene complex [Ru]=CH–OAc [6], generated by the reaction of Zhan catalyst-1B (14) with vinyl acetate

• conversion of oxanorbornene (rac)-13 to heterotricycle (rac)-16 through the eight-membered-ring formation would be owing to the cis-relationships of the pentenyl and vinyl groups on the ring B of (rac)-15, which allows the proximal arrangement of the reacting sites in the RCM. The N-Boc derivatization of

Unexpected rearrangements and a novel synthesis of 1,1-dichloro-1-alkenones from 1,1,1-trifluoroalkanones with aluminium trichloride

• Beatrice Lansbergen,
• Catherine S. Meister and
• Michael C. McLeod

Beilstein J. Org. Chem. 2021, 17, 404–409, doi:10.3762/bjoc.17.36

• rise to [6,7]bicyclic ketones 9, and 10 and the linear acid chloride 13, respectively. We have also found that when the ketone is not present, the trifluoroalkyl substrate is converted into bicyclic vinyl chloride 17 when treated with AlCl3. We hope that this short communication will inspire other

Coupling biocatalysis with high-energy flow reactions for the synthesis of carbamates and β-amino acid derivatives

• Alexander Leslie,
• Thomas S. Moody,
• Megan Smyth,
• Scott Wharry and
• Marcus Baumann

Beilstein J. Org. Chem. 2021, 17, 379–384, doi:10.3762/bjoc.17.33

• utilized as it is frequently used for esterification reactions [26][27][28]. CALB could convert benzyl alcohol in the presence of vinyl butyrate into benzyl butyrate and acetaldehyde. To demonstrate the feasibility, the flow process was adapted by mixing a stream of vinyl butyrate (4, 3 equiv in toluene

•  3. The telescoped approach provided the quantitative conversion of benzyl alcohol into benzyl butyrate which could be removed by crystallization (from heptanes) after evaporation of toluene and residual vinyl butyrate. The resulting telescoped flow approach thus enabled the facile generation and

CF₃-substituted carbocations: underexploited intermediates with great potential in modern synthetic chemistry

• Anthony J. Fernandes,
• Armen Panossian,
• Bastien Michelet,
• Agnès Martin-Mingot,
• Frédéric R. Leroux and
• Sébastien Thibaudeau

Beilstein J. Org. Chem. 2021, 17, 343–378, doi:10.3762/bjoc.17.32

• formation of the corresponding α-(trifluoromethyl)allylcarbenium ion 103↔103’, the resonance form 103 of which could be trapped with arenes to afford (trifluoromethyl)vinyl-substituted derivatives 102 (Scheme 29) [79][80]. It was also suggested that the resonance form 103’ has a nonnegligible contribution

• exploited the reactivity of the trifluoromethylated iminium ion 192 and extended the scope of the reaction to a larger panel of nucleophiles, including alcohols, amines, aromatic and vinyl derivatives, as well as silylated nucleophiles (Scheme 47) [122]. Brigaud and Huguenot also suggested the formation of

Regioselective chemoenzymatic syntheses of ferulate conjugates as chromogenic substrates for feruloyl esterases

• Olga Gherbovet,
• Fernando Ferreira,
• Apolline Clément,
• Mélanie Ragon,
• Julien Durand,
• Sophie Bozonnet,
• Michael J. O'Donohue and
• Régis Fauré

Beilstein J. Org. Chem. 2021, 17, 325–333, doi:10.3762/bjoc.17.30

• -arabinofuranosides were significantly shortened (from 7 or 8 to 4–6 steps), and the transesterification yields were enhanced (from 46 to 73% and from 47 to 86%, respectively). This was achieved using enzymatic (immobilized Lipozyme® TL IM from Thermomyces lanuginosus) transesterification of unprotected vinyl

• molecule [12][15][16][17]. Additionally, the temporary protection of the functional groups is sometimes used during the synthesis in order to facilitate certain steps. Using an alternative approach, we employed a one-step regioselective transesterification of the unprotected vinyl ferulate 2 (synthesized

• ) displaying a hindered electron-withdrawing group. This led to a low target product yield (i.e., 5, 6, 8, and 9), a lower reactivity, and/or a higher hydrolysis of the vinyl ferulate into ferulic acid. Synthesis of ʟ-arabinofuranoside-free 4-nitrocatechol-1-yl–linker–ferulate chromogenic substrate 12 and

The preparation and properties of 1,1-difluorocyclopropane derivatives

• Kymbat S. Adekenova,
• Peter B. Wyatt and
• Sergazy M. Adekenov

Beilstein J. Org. Chem. 2021, 17, 245–272, doi:10.3762/bjoc.17.25

• hydrogenolysis of benzyl ethers (H2, Pd) [72], DIBAL-H reduction of esters to form alcohols [73], oxidative cleavage of vinyl groups to form carboxylic acids (KMnO4) [74], and the conversion of the acids into amines using the Curtius rearrangement (SOCl2, followed by Me3SiN3, thermolysis, and acid hydrolysis of

• O–H and N–H bonds of water, alcohols, carboxylic acids, and amines to form the observed products 121. 1,1-Difluoro-2-siloxy-2-vinylcyclopropane (122) was subjected to a fluoride-catalyzed ring opening to afford 1-fluorovinyl vinyl ketones such as 123. These compounds underwent a Lewis acid-catalyzed

A sustainable strategy for the straightforward preparation of 2H-azirines and highly functionalized NH-aziridines from vinyl azides using a single solvent flow-batch approach

• Michael Andresini,
• Leonardo Degannaro and
• Renzo Luisi

Beilstein J. Org. Chem. 2021, 17, 203–209, doi:10.3762/bjoc.17.20

• preparation of 2H-azirines and their stereoselective transformation into highly functionalized NH-aziridines, starting from vinyl azides and organolithium compounds. The protocol has been developed using cyclopentyl methyl ether (CPME) as an environmentally benign solvent, resulting into a sustainable, safe

• of vinyl azides, or by other strategies involving oximes, imines and oxazoles [24]. One appealing strategy for the preparation of 2H-azirines involves the use of readily available vinyl azides [25][26][27][28][29][30]. However, the batch cyclization of vinyl azides into the corresponding 2H-azirines

• resulted in safer procedures for the preparation of 2H-azirines, offering valuable alternatives for production purposes. In 2013, Kirschning harnessed the photoinduced electrocyclization of vinyl azides in a microfluidic photoreactor yielding 2H-azirines as precursors of 1,3-dipolarophiles (Scheme 1a) [27

Progress in the total synthesis of inthomycins

• Bidyut Kumar Senapati

Beilstein J. Org. Chem. 2021, 17, 58–82, doi:10.3762/bjoc.17.7

• bromine in acetic acid, and then triethyl phosphite. Next, compound 28 was treated with sodium hydride followed by aldehyde 29 [37] to give (E,E)-dienyl stannane 30 in 50% yield. The key Stille coupling between 30 and vinyl iodide 31, prepared by Takai reaction [38] of phenylacetaldehyde, in presence of

• mixture of (Z,E)/(E,E)-36a, respectively). Aldehyde 35 was then converted into dibromide 37 using PPh3/CBr4 followed by stereoselective palladium-catalyzed monoreduction according to the literature available protocol [41] to give vinyl bromide 38 in 76% yield (Z/E as 99:1 mixture). Iodide 15a [42] was

• . J. K. Taylor and co-workers reported the first total synthesis of inthomycin B ((+)-2) using a Stille coupling of a stannyl-diene with an oxazole vinyl iodide unit followed by a Kiyooka ketene acetal/amino acid-derived oxazaborolidinone procedure as its cornerstones (Scheme 4) [43]. In the beginning

Recent progress in the synthesis of homotropane alkaloids adaline, euphococcinine and N-methyleuphococcinine

• Dimas J. P. Lima,
• Antonio E. G. Santana,
• Michael A. Birkett and
• Ricardo S. Porto

Beilstein J. Org. Chem. 2021, 17, 28–41, doi:10.3762/bjoc.17.4

• in 65% yield and complete stereochemistry retention. When isocyanate (−)-84 was treated with copper chloride in water and THF, the (+)-euphococcinine (2) was obtained in 63% yield. A similar sequence was used to synthesize natural (−)-adaline (1, Scheme 10). In this case, vinyl iodide 86 was obtained

• -carboxaldehyde, 9:1 77a/77b, 67% (after chromatographic separation); ii) butyl vinyl ether, Hg(OAc)2, (10 mol %), sealed tube, 130–135 °C, 79%; iii) vinylmagnesium bromide, −78 °C; iv) Dess–Martin periodinane, 83% over two steps; v) Grubbs catalyst 2nd gen., CH2Cl2, reflux, 74%; vi) 1. (PhSe)2, NaBH4, EtOH; 2

• ; 2. 1-heptyne; 3. I2, THF, 82%; ii) 1. n-BuLi, Et2O, −78 °C to 0 °C; 2. p-menthyl-3-carboxaldehyde, 5:1 (−)-87a / (−)-87b, 50% (after chromatographic separation); iii) butyl vinyl ether, Hg(OAc)2, (10 mol %), sealed tube, 130–135 °C, 79%; iv) vinylmagnesium bromide, −78 °C; v) Dess–Martin periodinane

Silver-catalyzed synthesis of β-fluorovinylphosphonates by phosphonofluorination of aromatic alkynes

• Yajing Zhang,
• Qingshan Tian,
• Guozhu Zhang and
• Dayong Zhang

Beilstein J. Org. Chem. 2020, 16, 3086–3092, doi:10.3762/bjoc.16.258

• selectflour to generate Ag(III)F. Subsequently, ethyl phosphite is oxidized by Ag(III)F to generate a P-centered radical (INT-I) and Ag(II)F. The electrophilic phosphonyl radical addition to the triple bond of 1a generates the vinyl-free radical INT-II, which is subsequently trapped by AgF(II) to afford the

• corresponding product 2a. The vinyl radical INT-II stabilizes the unpaired electron through resonance, and INT-II is more stable than INT-III [27][28]. Finally, we obtained the Z-configured product with respect to the aryl and phosphonyl groups. We also performed control experiments under standard conditions to

Amine–borane complex-initiated SF₅Cl radical addition on alkenes and alkynes

• Audrey Gilbert,
• Pauline Langowski,
• Marine Delgado,
• Laurent Chabaud,
• Mathieu Pucheault and
• Jean-François Paquin

Beilstein J. Org. Chem. 2020, 16, 3069–3077, doi:10.3762/bjoc.16.256

• ester derivatives. When using vinyl benzoate as the starting material, the desired compound 2g was obtained with a 75% yield with Dolbier’s protocol and an 84% yield with the DICAB protocol, while the addition product 2h was obtained with an 81% yield using Et3B as the radical initiator and 70% when the

Deoxyfluorination of acyl fluorides to trifluoromethyl compounds by FLUOLEAD^®/Olah’s reagent under solvent-free conditions

• Yumeng Liang,
• Akihito Taya,
• Zhengyu Zhao,
• Norimichi Saito and
• Norio Shibata

Beilstein J. Org. Chem. 2020, 16, 3052–3058, doi:10.3762/bjoc.16.254

• reaction of aryl, vinyl, and heteroaryl iodides with 2-(difluoromethoxy)-5-nitropyridine [18]. A wide variety of acyl fluorides were efficiently obtained in high yields. We were fascinated by the synthetic versatility of acyl fluorides [19] to form other functional groups during our research on acyl

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• 64% yield over three steps. The conversion of 138 to sinensilactam A (20) was achieved in two steps. Platinum-catalyzed [3 + 2] cycloaddition The platinum-catalyzed intermolecular [3 + 2] cycloaddition of propargyl ether derivatives and vinyl ether producing polycyclic indoles was disclosed by

• Iwasawa and co-workers in 2011 [18][66] (Scheme 10A). Treatment of Boc-protected aniline 139 and n-butyl vinyl ether (140) with a platinum(II) catalyst afforded tricyclic indole 141 in 83% yield. The authors suggested that this catalytic [3 + 2] cycloaddition reaction may involve an α,β-unsaturated

• complex intermediate C. C is subjected to the nucleophilic attack of n-butyl vinyl ether (140) and generates alkenyl metallic intermediate D. Intramolecular nucleophilic attack onto the oxonium carbon of D affords the [3 + 2] cycloaddition product 141 with regeneration of the catalyst A. In 2020, Ye and co

Ring-closing metathesis of prochiral oxaenediynes to racemic 4-alkenyl-2-alkynyl-3,6-dihydro-2H-pyrans

• Viola Kolaříková,
• Markéta Rybáčková,
• Martin Svoboda and
• Jaroslav Kvíčala

Beilstein J. Org. Chem. 2020, 16, 2757–2768, doi:10.3762/bjoc.16.226

• dihydropyrans bearing alkynyl and vinyl groups, a substitution of the allyl group for methallyl, acryloyl or methacryloyl resulted in the complete loss of reactivity or formation of highly complex mixtures. On the other hand, the reaction showed a significantly lower sensitivity to terminal modifications of the

Formation of an exceptionally stable ketene during phototransformations of bicyclo[2.2.2]oct-5-en-2-ones having mixed chromophores

• Asitanga Ghosh

Beilstein J. Org. Chem. 2020, 16, 2297–2303, doi:10.3762/bjoc.16.190

• like phenyl or isopropenyl at the bridgehead position were analyzed for the first time in different solvents and upon irradiation with different wavelengths. In all cases, a regioselective photoinduced 1,5-phenyl migration leading to vinyl ketenes from the more congested site of the molecule to the

• , the photorearrangement route is selectively from the α,β-enone part and we confirmed that the irradiation follows a type B rearrangement (Scheme 2) [16]. Another interesting set of competitive 1,5-(C–O) acyl shift rearrangements (formation of vinyl ketene) with that of 1,2-AS were observed when

• congested site of the molecule to the less one leading to the formation of vinyl ketenes 4c–e and 5b,d,f along with the formation of the 1,2-AS photoproduct 6a,d (Scheme 3, Table 1). Some of the vinyl ketenes were stable enough to be kept at room temperature up to 24 hours together as verified by time

Photosensitized direct C–H fluorination and trifluoromethylation in organic synthesis

• Shahboz Yakubov and
• Joshua P. Barham

Beilstein J. Org. Chem. 2020, 16, 2151–2192, doi:10.3762/bjoc.16.183

Access to highly substituted oxazoles by the reaction of α-azidochalcone with potassium thiocyanate

• Mysore Bhyrappa Harisha,
• Pandi Dhanalakshmi,
• Rajendran Suresh,
• Raju Ranjith Kumar and
• Shanmugam Muthusubramanian

Beilstein J. Org. Chem. 2020, 16, 2108–2118, doi:10.3762/bjoc.16.178

• ; potassium persulfate; thiazole; vinyl azide; Introduction Vinyl azide is one of the most versatile and potent building blocks explored in the synthesis of several heterocycles [1][2][3][4][5]. It can undergo photolysis or thermolysis to afford highly strained three-membered 2H-azirine, which can act as the

• -trisubstituted oxazoles 3. Reaction of vinyl azide 1 and 3 with ferric nitrate. Reactions were carried out at reflux temperature, using 1 (1 mmol), 2 (3 mmol), ferric nitrate (0.5 mmol) in acetonitrile (2 mL) for 6 h. Yields refer to the pure products after column chromatography. Optimisation studies.a Screening

Syntheses of spliceostatins and thailanstatins: a review

• William A. Donaldson

Beilstein J. Org. Chem. 2020, 16, 1991–2006, doi:10.3762/bjoc.16.166

• produced 46. The hydrozirconation of 46 with Schwartz’s reagent under equilibrating conditions, followed by the reaction with I2 gave the vinyl iodide 47. Finally, the activation of the C-14 hydroxy group and the SN2 displacement with azide gave the C-8–C-16 fragment 48. Ghosh relied on a reductive

• of the C-6 stereocenter (Scheme 13) [15][16]. The administration of the vinyllithium reagent, generated from the addition of the vinyl bromide 80 to 79, gave a separable 1:1 mixture of the diastereomeric alcohols 81a and 81b. The undesired stereoisomer 81b was converted into 81a by a Mitsunobu

• [38][39] (Scheme 16). After a protecting group manipulation, the C-1 allyl group was truncated via ozonolysis, and the C-3 hydroxy group was transformed into an exocyclic methylene group to give 99. The conversion of the C-6 alcohol moiety to a vinyl group by oxidation and Wittig methenylation to give

Synthesis of 3(2)-phosphonylated thiazolo[3,2-a]oxopyrimidines

• Ksenia I. Kaskevich,
• Anastasia A. Babushkina,
• Vladislav V. Gurzhiy,
• Dmitrij M. Egorov,
• Nataly I. Svintsitskaya and
• Albina V. Dogadina

Beilstein J. Org. Chem. 2020, 16, 1947–1954, doi:10.3762/bjoc.16.161

• establish from the 1H and 13C NMR spectral data. The signals of the vinyl proton of the uracil moiety are represented by quartets (4JHH = 1.4 Hz) in the δH 8.1 ppm region (quartet at δH 6 ppm for 6-methyl-5-oxo isomer). In the 13C NMR spectra, the signals of ethylene carbons of the uracil ring are presented

Design, synthesis and application of carbazole macrocycles in anion sensors

• Alo Rüütel,
• Ville Yrjänä,
• Sandip A. Kadam,
• Indrek Saar,
• Mihkel Ilisson,
• Astrid Darnell,
• Kristjan Haav,
• Tõiv Haljasorg,
• Lauri Toom,
• Johan Bobacka and
• Ivo Leito

Beilstein J. Org. Chem. 2020, 16, 1901–1914, doi:10.3762/bjoc.16.157

• and the ability to target a larger variety of ions compared to e.g. glass. Plasticizers may be required to improve transmembrane diffusion rates unless the polymer is self-plasticizing. Plasticized poly(vinyl chloride) (PVC), which was used in this study, is an example of a commonly used membrane

• from poly(vinyl chloride) plasticized with bis(2-ethylhexyl)sebacate (DOS), which was chosen since it was considered to be suitable for use in membranes with monovalent primary ions [5]. The compositions of the ISMs were 2 wt % ionophore, 50 mol % anion exchanger relative to the ionophore, 65 wt % DOS

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• aromatic coupling partner, including frequently used Weinreb amides or functionalized secondary and primary amides. Regarding the scope of olefin substrates, the reaction tolerated numerous functional groups including acrylates, vinyl silanes or sulfones which was interesting from the post

Pauson–Khand reaction of fluorinated compounds

• Jorge Escorihuela,
• Daniel M. Sedgwick,
• Alberto Llobat,
• Mercedes Medio-Simón,
• Pablo Barrio and
• Santos Fustero

Beilstein J. Org. Chem. 2020, 16, 1662–1682, doi:10.3762/bjoc.16.138

• inter- and intramolecular versions. Furthermore, the use of vinyl fluorides as olefinic counterparts had been completely overlooked. In this review, we collect the advances both on the stoichiometric and catalytic intermolecular and intramolecular fluoro-Pauson–Khand reaction, with special attention to

• groups at the vinylic position, very few examples have been described to date. In this context, our group recently explored the reactivity of 1,n-enynes bearing a vinyl fluoride moiety as the olefin counterpart in the intramolecular PKR [59] (Scheme 18). The study of the behavior of this kind of

• recovered, in agreement with previous precedents describing that trisubstituted alkenes are very unreactive substrates in this kind of process (Scheme 28) [65]. The influence of the introduction a vinyl fluoride moiety on the PKR was also investigated (Scheme 29). The resulting cyclopentenones 57 were

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125