α-(Aminomethyl)acrylates as acceptors in radical–polar crossover 1,4-additions of dialkylzincs: insights into enolate formation and trapping

• Angel Palillero-Cisneros,
• Paola G. Gordillo-Guerra,
• Fernando García-Alvarez,
• Olivier Jackowski,
• Franck Ferreira,
• Fabrice Chemla,
• Joel L. Terán and
• Alejandro Perez-Luna

Beilstein J. Org. Chem. 2023, 19, 1443–1451, doi:10.3762/bjoc.19.103

• interesting to note that the levels of induction for the 1,4-addition–aldol condensations are somewhat higher than those obtained for the 1,4-additions. Aldehydes also proved competent terminal electrophiles for the tandem sequence. Illustratively, adducts 23 and 24 were obtained from α-(aminomethyl)acrylates

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• with alkynes under click chemistry conditions (Scheme 48) [15]. The products were obtained in high yields (93–99%). Cazin and co-workers systematically investigated the [3 + 2] cycloaddition of a series of six azides with seven terminal alkynes catalyzed by different 1,2,3-triazolylidene–CuCl complexes

• , generated from the tetranuclear complex, as the catalytically active species. 2.4 A3 reactions In recent years, the three component reaction of an aldehyde, a secondary amine and a terminal alkyne, known as A3 reaction to afford chiral propargylamines 140 has received much attention. The latter compounds

• diastereoselectivity (dr > 99:1) was observed in the reaction of chiral ketones. Hoveyda and co-workers [82] employed two types of NHC–Cu(I) complexes to catalyze the protoboration of terminal allenes to obtain vinylboranes (Scheme 60). A set of alkyl- and aryl-substituted allenes was used as substrates. The

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• azide was combined with a subsequent copper-catalyzed (3 + 2) cycloaddition with terminal alkynes. This one-pot process was developed with a simple model alkyne, but then applied to more complex alkynes bearing enantiopure 1,2-oxazinyl substituents. Hence, the precursor compounds 1,2-, 1,3- or 1,4-bis

• aminopyrans [54], should be converted into divalent compounds via coupling of the terminal propynyl group with benzylic biazides. Since biazides are potentially explosive [22] it was very desirable to avoid their isolation and to generate these reactive species in situ from the corresponding benzylic halides

Consecutive four-component synthesis of trisubstituted 3-iodoindoles by an alkynylation–cyclization–iodination–alkylation sequence

• Nadia Ledermann,
• Alae-Eddine Moubsit and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2023, 19, 1379–1385, doi:10.3762/bjoc.19.99

• generated by a consecutive four-component reaction starting from ortho-haloanilines, terminal alkynes, N-iodosuccinimide, and alkyl halides in yields of 11–69%. Initiated by a copper-free alkynylation, followed by a base-catalyzed cyclizive indole formation, electrophilic iodination, and finally

• prior to terminal alkylation could provide a straightforward entry to trisubstituted 3-iodoindoles, which are valuable building blocks for accessing highly decorated (aza)indoles (Scheme 1). Here, we report the concise consecutive four-component synthesis of trisubstituted 3-iodoindoles. Results and

• nitrogen protection or activation using KOt-Bu in DMSO as a base. Under these conditions, the formation of the terminal (aza)indole anion is the driving force (Scheme 1) [34]. As a consequence, the electrophilic trapping of this intermediate with alkyl halides provides as concise access to N-substituted

Synthesis of ether lipids: natural compounds and analogues

• Marco Antônio G. B. Gomes,
• Alicia Bauduin,
• Chloé Le Roux,
• Romain Fouinneteau,
• Wilfried Berthe,
• Mathieu Berchel,
• Hélène Couthon and
• Paul-Alain Jaffrès

Beilstein J. Org. Chem. 2023, 19, 1299–1369, doi:10.3762/bjoc.19.96

Organic thermally activated delayed fluorescence material with strained benzoguanidine donor

• Alexander C. Brannan,
• Elvie F. P. Beaumont,
• Nguyen Le Phuoc,
• George F. S. Whitehead,
• Mikko Linnolahti and
• Alexander S. Romanov

Beilstein J. Org. Chem. 2023, 19, 1289–1298, doi:10.3762/bjoc.19.95

• matrices regardless of numerous efforts and cooling the films down to 16 K and applying long time delays. Conclusion We have synthesized and characterized a donor–acceptor-type thermally activated delayed fluorescent emitter 4BGIPN with four terminal benzoguanidine donor moieties surrounding the

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp³)–H to construct C–C bonds

• Hui Yu and
• Feng Xu

Beilstein J. Org. Chem. 2023, 19, 1259–1288, doi:10.3762/bjoc.19.94

• oxidative alkylation of cyclic benzyl ethers with malonates or ketones. Oxygen is used as a terminal oxidant at atmospheric pressure. The key intermediate of this oxidative coupling reaction is benzyl alcohol intermediate C (Scheme 4) [52]. The generation of N–O radicals from NHPI in the presence of oxygen

• triggers the whole coupling reaction. The potential application of NHIP as a catalyst for oxidative coupling reactions with oxygen as a terminal oxidant was explored. In 2011, Garcia-Mancheño et al. developed a Cu-catalyzed CDC of cyclic benzyl ethers 10 with aliphatic or α,β-unsaturated aldehydes 13 or 14

• terminal alkynes at room temperature (Scheme 15a) [67]. The ability to tune the reactivity of the trityl ion rationally improves the approach with excellent regio- and diastereoselectivity for the unsymmetric ethers. In 2018, Ye et al. reported a CDC reaction to form C(sp)–C(sp3) coupling products from

Radical ligand transfer: a general strategy for radical functionalization

• David T. Nemoto Jr,
• Kang-Jie Bian,
• Shih-Chieh Kao and
• Julian G. West

Beilstein J. Org. Chem. 2023, 19, 1225–1233, doi:10.3762/bjoc.19.90

• molecular iron catalyst II and stoichiometric hydroxyiodinane as a terminal oxidant [38]. It is proposed that an azidoiodinane is generated in situ and serves as the radical initiator, generating an azido radical which adds to the less substituted position on the alkene. The resultant transient radical is

• , including terminal aliphatic alkenes, internal (cyclic) styrenes, and one example of a nonconjugated diene, suggesting RLT to be compatible with many functionalities. The diastereoselectivity of the reaction varies, with high anti-selectivity being achieved with cyclic styrenes and low diastereoselectivity

• the addition of terminal oxidant. II: The proposed mechanism includes reoxidation of the iron catalyst through inner-sphere electron transfer by anionic nitrate. Funding J.G.W. acknowledges financial support from CPRIT (RR190025), NIH NIGMS (R35GM142738), Research Corporation for Science Advancement

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

• SCE (1c) were readily reduced and dehalogenated products obtained in excellent yields (70–92%) (Figure 11A). Sodium formate was found to be a more efficient terminal reductant than trialkylamines which the authors attributed to the formation of a carbon dioxide radical anion (CO2•−) upon oxidation of

• -poor aryl halide substrates (Figure 11C). While trialkylamines like Et3N or DIPEA have been proven to be suitable terminal reductants in conPET chemistry [15][45][46][51][54], they may still decrease photoreductant activity via back electron transfer [56], in contrast to CO2•− which has an entropic

• catalyst generation for the reduction of aryl halides. Compared to conPET chemistry with organic photocatalysts, no terminal reductants like trialkylamines or formates were required for redox-neutral transformations like the C–H arylation, borylation or phosphorylation owing to the interplay between the

Aromatic C–H bond functionalization through organocatalyzed asymmetric intermolecular aza-Friedel–Crafts reaction: a recent update

• Anup Biswas

Beilstein J. Org. Chem. 2023, 19, 956–981, doi:10.3762/bjoc.19.72

• after recrystallization. Subsequent ozonolysis of the terminal alkene functionality with a follow-up reduction furnished primary alcohol 134 which was transformed into the azide 135. Reduction of the azide 135 was accompanied by debenzylation, was followed by tosylation of the primary amine and exchange

Intermediates and shunt products of massiliachelin biosynthesis in Massilia sp. NR 4-1

• Till Steinmetz,
• Blaise Kimbadi Lombe and
• Markus Nett

Beilstein J. Org. Chem. 2023, 19, 909–917, doi:10.3762/bjoc.19.69

• formation of the terminal carboxamide in 6 might be due to a spontaneous C–N bond cleavage, which occurs in 1’’ prior to the cyclization, consistent with a mechanism recently proposed in photoxenobactin biosynthesis [34]. Despite the widespread occurrence of siderophores featuring a phenolic moiety with a

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• Heck cross-coupling [69][70]. However, researchers have developed various methods for the transition-metal-catalyzed C(sp2)–H olefination using various types of alkenes as coupling partners [71][72][73]. This part of the review covers reports for the alkenylation of pyridine with terminal alkynes

• the pyridine ring in bipyridine ring systems. In early 2009 Miura and co-workers [111] reported the rhodium-catalyzed regioselective reaction of aryl-N-heterocycles and aromatic imines with terminal silylacetylenes 209 to synthesize C–H-alkenylated products 210. The terminal silylacetylenes were

Synthesis, structure, and properties of switchable cross-conjugated 1,4-diaryl-1,3-butadiynes based on 1,8-bis(dimethylamino)naphthalene

• Semyon V. Tsybulin,
• Ekaterina A. Filatova,
• Alexander F. Pozharskii,
• Valery A. Ozeryanskii and
• Anna V. Gulevskaya

Beilstein J. Org. Chem. 2023, 19, 674–686, doi:10.3762/bjoc.19.49

• recrystallization of the crude product from ethanol. Next, the oxidative dimerization of terminal alkynes 6a–e was carried out in an aerobic medium in the CuI/TMEDA/iPr2NH system at room temperature, which proved to be effective in the synthesis of butadiynes 1–4 [15] (Scheme 3). The desired diarylbutadiynes 5a–e

• of λmax is observed. On passing to oligomers 5d and 5e bearing strong electron-withdrawing CN and NO2 substituents in the benzene rings the picture changes. The π-deficient nature of the terminal aryl rings obviously facilitates their conjugation with π-excessive DMAN fragments. The λmax values and

• and 6b·HBF4. Since the UV–vis spectra of salts 11 are similar (even and especially in cases of methoxy and nitro derivatives 11e and 11b), it can be assumed that in all salts 11 the electron transfer from the terminal aryl to the central naphthalene rings takes place. Naturally, the more deficient the

Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

• Phebox-based rhodium complex (C3) to catalyze the tandem conjugate addition of a terminal alkene followed by reacting the bicyclic dienol silyl ether intermediate with Michael acceptors in a one-pot procedure (Scheme 50) [92]. The bridged cyclic products 196a,b, formed by a double Michael addition

Access to cyclopropanes with geminal trifluoromethyl and difluoromethylphosphonate groups

• Ita Hajdin,
• Romana Pajkert,
• Mira Keßler,
• Jianlin Han,
• Haibo Mei and
• Gerd-Volker Röschenthaler

Beilstein J. Org. Chem. 2023, 19, 541–549, doi:10.3762/bjoc.19.39

• -pentafluoropropylphosphonate, bearing a trifluoromethyl and a difluoromethyl group is reported for the first time. Its application in CuI-catalyzed cyclopropanation reactions with aromatic and aliphatic terminal alkenes under mild reaction conditions is demonstrated. In total, sixteen new cyclopropanes were synthesized in

• difluoromethylphosphonate groups at the ring might be possible by using our newly developed bench-stable diazo reagent CF3C(N2)CF2P(O)(OEt)2. Therefore, we report herein our preliminary results toward this goal via copper iodide-catalyzed cyclopropanation reaction of an acceptor carbene precursor with selected terminal

• target diazo reagent 5, which contains both a trifluoromethyl and a difluoromethylphosphonate moiety, was isolated as a stable, non-volatile liquid (Scheme 2). To highlight the synthetic utility of the novel carbene precursor 5, subsequent [2 + 1] cycloaddition reactions with selected terminal aromatic

Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

• -catalyzed borylalkynylation of oxabenzonorbornadiene (30b) with B2pin2 (53) and bromoalkynes 62 (Scheme 10) [44]. The scope of the reaction was limited to only two examples of bromoalkynes reacting with oxabenzonorbornadiene (30b). Notably, the yield of the reaction dramatically diminished when the terminal

Computational studies of Brønsted acid-catalyzed transannular cycloadditions of cycloalkenone hydrazones

• Manuel Pedrón,
• Jana Sendra,
• Irene Ginés,
• Tomás Tejero,
• Jose L. Vicario and
• Pedro Merino

Beilstein J. Org. Chem. 2023, 19, 477–486, doi:10.3762/bjoc.19.37

• common reaction conditions. The reaction has been defined by Houk and Rueping as a (3+ + 2) monopolar cycloaddition [33] pointing out the protonated state of the imino nitrogen of the hydrazone in contrast to the well-known 1,3-dipolar cycloaddition of azomethine imines in which the terminal nitrogen has

Mechanochemical solid state synthesis of copper(I)/NHC complexes with K₃PO₄

• Ina Remy-Speckmann,
• Birte M. Zimmermann,
• Mahadeb Gorai,
• Martin Lerch and
• Johannes F. Teichert

Beilstein J. Org. Chem. 2023, 19, 440–447, doi:10.3762/bjoc.19.34

• been shown to be active in a variety of reduction/hydrogenation transformations employing dihydrogen as terminal reducing agent. Keywords: ball mill; bifunctional catalysis; catalytic hydrogenations; copper; mechanochemical synthesis; N-heterocyclic carbenes; Introduction Prominent goals of green

• an ester reduction with H2 as terminal reducing agent utilizing bifunctional copper(I)/NHC complex 5 bearing a guanidine moiety as additional catalytic unit [48]. This catalyst acts by employing the copper(I)/NHC complex for H2 activation on the one hand and by using the guanidine subunit for

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• -dipolar cycloaddition reaction between an azide and a terminal alkyne, also popular as "click reaction" or CuAAC reaction. Moreover, the 1,2,3-triazole ring also serves as a spacer and an electron transfer bridge between the porphyrin and the attached chromophores. In order to provide a critical overview

• connect a porphyrin with a chromophoric group. Among these, the copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction [1][2] of azides with terminal alkynes is a popular and well established process to link a porphyrin with other moieties via 1,2,3-triazole group [3] (Figure 1). The term “click

• triazoloporphyrins 32a–c and triazole-bridged bisporphyrins 34 in good yields. The “click reaction” of azidoporphyrin 30 with the terminal alkynes 31a–c and 33 in a THF/water (3:1) mixture was investigated by using different catalytic systems. Among these, copper carbene (SIMes)CuBr proved to be a better catalyst

Group 13 exchange and transborylation in catalysis

• Dominic R. Willcox and
• Stephen P. Thomas

Beilstein J. Org. Chem. 2023, 19, 325–348, doi:10.3762/bjoc.19.28

• -catalysed hydroboration of alkynes was first reported by Periasamy using N,N-diethylaniline·BH3 as the catalyst and HBcat as the turnover reagent (terminal reductant) [48][49]. This was followed by Hoshi who used dialkylboranes, 9-borabicyclo(3.3.1)nonane (H-B-9-BBN) and dicyclohexylborane (Cy2BH) to

• of allenes, using various boronates as the terminal reductant (Scheme 5) [68]. Experimental and computational studies suggested the reaction proceeded by hydroboration of the allene 14 by bis(pentafluorophenyl)borane to give an allylborane 15, which underwent allylation of a second equivalent of the

• an ambiphilic aluminium precatalyst, (Me2N)C6H4AlMe2, Thomas et al. were able to shut down hydroalumination by the alane and catalyse the C–H borylation of terminal alkynes with HBpin (Scheme 21) [96]. Through kinetic analysis, it was found that the rate of the alkynyl-Bpin product formation was

Strategies to access the [5-8] bicyclic core encountered in the sesquiterpene, diterpene and sesterterpene series

• Cécile Alleman,
• Charlène Gadais,
• Laurent Legentil and
• François-Hugues Porée

Beilstein J. Org. Chem. 2023, 19, 245–281, doi:10.3762/bjoc.19.23

• relied on an intramolecular RCM reaction on compound 74 between the two terminal olefins, that could lead to the formation of a trisubstituted double bond (compound 75), and further access to the required α-methyl ketone. However, despite many attempts, no cyclization occurred. Indeed, the disubstituted

• methylene in compound 74 and the formation of a trisubstituted alkene in 75 were assumed to cause an important steric hindrance unfavorable for the cyclization process. As a solution, the RCM was envisaged on 76 which possesses two terminal double bonds and successfully produced cyclooctene 77 in 65–80

• in α-position to the keto function. This terminal double bond prefigures the late RCM cyclization. trans-Hydrindanone 87 was isolated as a single diastereomer and possesses 5 out of the 10 stereogenic centers of nitidasin (93). In parallel, (−)-citronellene (88) was converted into derivative 89

Investigation of cationic ring-opening polymerization of 2-oxazolines in the “green” solvent dihydrolevoglucosenone

• Solomiia Borova and
• Robert Luxenhofer

Beilstein J. Org. Chem. 2023, 19, 217–230, doi:10.3762/bjoc.19.21

• formation of covalent species [20]. Signals in the 1H NMR spectra that can be attributed to DLG complicate the analysis of the data obtained, while the peaks attributed to the terminal oxazolinium proton or formation of termination groups by the covalent mechanism overlap with the solvent or polymer

• potassium hydroxide tend to terminate at the 2-position. This results in the formation of POx containing a secondary amine and a cleavable ester terminal group [49]. Subsequent dehydration under conditions of MALDI-TOF mass spectrometry might lead to a dehydration, although this is speculative at this point

Sequential hydrozirconation/Pd-catalyzed cross coupling of acyl chlorides towards conjugated (2E,4E)-dienones

• Benedikt Kolb,
• Daniela Silva dos Santos,
• Sanja Krause,
• Anna Zens and
• Sabine Laschat

Beilstein J. Org. Chem. 2023, 19, 176–185, doi:10.3762/bjoc.19.17

• Crombie’s work on dienamides and prepared dienoates 15 by hydrozirconation of terminal alkynes 16 followed by Pd-catalyzed cross coupling with enoates 17 [55][56]. A repetitive approach gave rise to oligoenoates [57]. Hydrozirconations were also combined with carbonylations to install carbonyl groups. For

• example, the sequential hydrozirconation/carbonylation of propargylic ethers 18 reported by Donato [58] yielded α,β-unsaturated lactones 19. Beside the hydrozirconation/acylation sequence of nitriles utilizing acid chlorides published by Majoral/Floreancig [59][60], Cox revealed that terminal alkynes 16

• enone building blocks 23 for the synthesis of clifednamides [54][62]. The addition of Schwartz's reagent proceeds as a syn-addition affording (E)-alkenylzirconocenes 24 from terminal alkynes [28]. Based on these precedents from the literature, we surmised that it might be possible to establish a related

Total synthesis of insect sex pheromones: recent improvements based on iron-mediated cross-coupling chemistry

• Eric Gayon,
• Guillaume Lefèvre,
• Olivier Guerret,
• Adrien Tintar and
• Pablo Chourreu

Beilstein J. Org. Chem. 2023, 19, 158–166, doi:10.3762/bjoc.19.15

• linkage of several insect pheromones. Cahiez paved the way of this strategy in 2008, showing that (E)-dodeca-9,11-dien-1-yl acetate (2), the sex pheromone of red bollworm moth (Diparopsis castanea), which contains a terminal diene, could be obtained at a laboratory scale (ca. 200 mg) by means of iron

• -coupling methods using Grignard reagents bearing terminal alkoxide magnesium moieties and dienyl halides. This strategy is moreover particularly appealing since the magnesium alkoxide additive used in the cross-coupling is also a part of the final synthetic target. The oxygen atom of the -OMgX

• functionality indeed affords the terminal oxidized function of the pheromone molecule (alkoxy acetate in 2 or 3, Scheme 4a and 4b, or formyl group in 1, Scheme 4c). As a representative target, we developed the total synthesis of the codling moth sex pheromone, (8E,10E)-dodecadien-1-ol (4), featuring the

Nostochopcerol, a new antibacterial monoacylglycerol from the edible cyanobacterium Nostochopsis lobatus

• Naoya Oku,
• Saki Hayashi,
• Yuji Yamaguchi,
• Hiroyuki Takenaka and
• Yasuhiro Igarashi

Beilstein J. Org. Chem. 2023, 19, 133–138, doi:10.3762/bjoc.19.13

• signals (δH 1.62 and ca. 1.39–1.30) were observed, implying that compound 1 is a derivative of a fatty acid. Indeed, all oxygenated protons constituted a spin system (CH21'–CH2'–CH23') in the COSY spectrum (Figure 1), and considering the lack of any terminal group besides CH316, monoacylglycerol was the

• , interconnection of the acyl and glyceryl units via an ester linkage was verified by three HMBC correlations from the terminal protons (H1, H2, and H1') of both units to the carboxy carbon (C1), leaving two protons to occupy C2' and C3' diol. Thus, compound 1 was determined to be a new monoacylglycerol and named