Interaction of a pyrene derivative with cationic [60]fullerene in phospholipid membranes and its effects on photodynamic actions

• Hayato Takagi,
• Çetin Çelik,
• Ryosuke Fukuda,
• Qi Guo,
• Tomohiro Higashino,
• Hiroshi Imahori,
• Yoko Yamakoshi and
• Tatsuya Murakami

Beilstein J. Org. Chem. 2024, 20, 2732–2738, doi:10.3762/bjoc.20.231

• ). Measurements were performed following equilibration at 10 °C at a scan rate of 180 °C/h. Measurements were also performed after mixing of 50, 100 or 500 µM PyBA (Sigma-Aldrich, St. Louis, MI, USA) and DMPC liposomes without catC60 or C60 followed by dialysis of the mixture against 3 L PBS for 2 h to remove

Transition-metal-free synthesis of arylboronates via thermal generation of aryl radicals from triarylbismuthines in air

• Yuki Yamamoto,
• Yuki Konakazawa,
• Kohsuke Fujiwara and
• Akiya Ogawa

Beilstein J. Org. Chem. 2024, 20, 2577–2584, doi:10.3762/bjoc.20.216

• with halogen or triflate groups. Recently, transition-metal-catalyzed direct borylation of arenes via C–H bond activation has been reported, although the design of the substrate and ligands is somewhat complicated [16][17][18][19][20][21][22]. Since the complete removal of catalyst-derived metal

Anion-dependent ion-pairing assemblies of triazatriangulenium cation that interferes with stacking structures

• Yohei Haketa,
• Takuma Matsuda and
• Hiromitsu Maeda

Beilstein J. Org. Chem. 2024, 20, 2567–2576, doi:10.3762/bjoc.20.215

• intermolecular C–H···π interactions between the proximally located CH3 and TATA+ units, as obtained by the Hirshfeld surface analysis (Figure 4) [33][34][35][36]. The arrangement of the ion pairs depended on the counteranions, which formed different interactions. Smaller counteranions were located above the

• electron-deficient TATA+ core through the interactions of the methyl units. In fact, in 2+-Cl−, Cl− was located 3.43 Å above the TATA+ core and was interacted with the surrounding CH3 units, with C(–H)···Cl− distances of 3.74, 3.85, and 3.96 Å (Figure 3a, Figure 5a and Figure S17 in Supporting Information

• File 1). As a crystallization solvent, three CHCl3 molecules were located between the 2,6-dimethylphenyl units by forming hydrogen bonding with Cl− with C(–H)···Cl− distances of 3.36, 3.36, and 3.37 Å. A similar arrangement of the counteranions was observed for 2+-BF4− and 2+-PF6−, with the BF4− and

A review of recent advances in electrochemical and photoelectrochemical late-stage functionalization classified by anodic oxidation, cathodic reduction, and paired electrolysis

• Nian Li,
• Ruzal Sitdikov,
• Ajit Prabhakar Kale,
• Joost Steverlynck,
• Bo Li and
• Magnus Rueping

Beilstein J. Org. Chem. 2024, 20, 2500–2566, doi:10.3762/bjoc.20.214

• been systematically summarized, classifying them by targeted C–H bond functionalization and the newly formed bonds [4][5]. In this review, we aim to provide a comprehensive classification and overview of the currently available electrochemical and photoelectrochemical methods for the LSF of

• industrial settings. An anodic oxidation is frequently employed for C–H functionalization, which can simplify late-stage functionalization strategies. Additionally, many of these synthetic methods do not require precious metals, enhancing their appeal in terms of sustainability and cost-effectiveness

• in schemes as H2↑) in the cathodic half-reaction, which will however not be addressed in greater detail in this review. 1.1 Direct anodic oxidation of substrates 1.1.1 C–H bond functionalization. C–H bond carbofunctionalization: CF3 groups can be installed on heteroarenes at a late stage via a TM

Hypervalent iodine-mediated cyclization of bishomoallylamides to prolinols

• Smaher E. Butt,
• Konrad Kepski,
• Jean-Marc Sotiropoulos and
• Wesley J. Moran

Beilstein J. Org. Chem. 2024, 20, 2455–2460, doi:10.3762/bjoc.20.209

• provided slight improvements in yield (Table 1, entries 2–4). The more electron-rich 2-iodo-1,3-dimethoxybenzene led to a further increase in yield to 44% (Table 1, entry 5). 1,2-Diiodobenzene has been reported to be a superior precatalyst in intermolecular C–H aminations of arenes but only provided 40

Synthesis and conformational analysis of pyran inter-halide analogues of ᴅ-talose

• Olivier Lessard,
• Mathilde Grosset-Magagne,
• Paul A. Johnson and
• Denis Giguère

Beilstein J. Org. Chem. 2024, 20, 2442–2454, doi:10.3762/bjoc.20.208

• exception being bromine). Dipole moments for the 4C1 structures are 2 Debye larger than for 1C4 structures, making them substantially more stable in chloroform. Both chair structures have multiple C–F bonds in gauche arrangements which are stable due to hyperconjugation: there is donation from C–H bonding

• NBO to an unoccupied NBO that would stabilize the system. The results are presented in Table 9. In both cases, there is also donation from the halogen lone pairs to C–H and C–C antibonding orbitals, but as these effects were near equivalent in both chair structures, they are omitted. Conclusion We

Synthesis, electrochemical properties, and antioxidant activity of sterically hindered catechols with 1,3,4-oxadiazole, 1,2,4-triazole, thiazole or pyridine fragments

• Daria A. Burmistrova,
• Andrey Galustyan,
• Nadezhda P. Pomortseva,
• Kristina D. Pashaeva,
• Maxim V. Arsenyev,
• Oleg P. Demidov,
• Mikhail A. Kiskin,
• Andrey I. Poddel’sky,
• Nadezhda T. Berberova and
• Ivan V. Smolyaninov

Beilstein J. Org. Chem. 2024, 20, 2378–2391, doi:10.3762/bjoc.20.202

• ) Å, the angle O1–H1–O4 106°; O1–H1···O4A: the H1···O4 distance is 2.82(1) Å, the O1···O4 distance is 3.146(3) Å, the angle O1–H1–O4 101°, Figure 3). Additionally, the packing of these chains in the crystal is caused by the intermolecular C–H···O and N–O···π contact. Catechol 6 in crystal also forms

Hydrogen-bond activation enables aziridination of unactivated olefins with simple iminoiodinanes

• Phong Thai,
• Lauv Patel,
• Diyasha Manna and
• David C. Powers

Beilstein J. Org. Chem. 2024, 20, 2305–2312, doi:10.3762/bjoc.20.197

• ), Koser’s reagent (PhI(OH)OTs), Zhdankin’s reagent (C6H4(o-COO)IN3, ABX), and Dess–Martin periodinane (DMP) – and find application in an array of synthetically important transformations including olefin difunctionalization, carbonyl desaturation, alcohol oxidation, and C–H functionalization [3][4

Deuterated reagents in multicomponent reactions to afford deuterium-labeled products

• Kevin Schofield,
• Shayna Maddern,
• Yueteng Zhang,
• Grace E. Mastin,
• Rachel Knight,
• Wei Wang,
• James Galligan and
• Christopher Hulme

Beilstein J. Org. Chem. 2024, 20, 2270–2279, doi:10.3762/bjoc.20.195

• [D3]-formamide. The ability to deuterate at benzylic positions is particularly relevant as benzylic C–H bonds are common in biologically relevant chemotypes and moreover appear in approximately 25% of the top selling 200 pharmaceuticals [23]. Benzyl cation stability is a driver of metabolism at these

• sites where benzylic C–H bonds readily undergo metabolism driven by cytochrome P450 oxidases via single-electron oxidation [24]. This metabolic lability may be tempered by hydrogen replacement with deuterium, an almost perfect bio-isosteric replacement (C–H to C–D) which maintains 3D surface, shape and

• flexibility [8]. Indeed, early incorporation of deuterium during hit generation may negate the need for late-stage C–H functionalization which often requires strong external oxidants or affords products with significantly lower biological activity [25][26][27]. Thus, eight MCRs were evaluated for D-reagent

Heterocycle-guided synthesis of m-hetarylanilines via three-component benzannulation

• Andrey R. Galeev,
• Maksim V. Dmitriev,
• Alexander S. Novikov and
• Andrey N. Maslivets

Beilstein J. Org. Chem. 2024, 20, 2208–2216, doi:10.3762/bjoc.20.188

• mainly via metal-catalyzed C–N or C–C bond formation. Despite recent advances in the area of remote C–H functionalization, this strategy still requires some pre-functionalization of the starting material or the use of directing groups [28][29][30][31][32]. An alternative strategy is based on aromatic

From perfluoroalkyl aryl sulfoxides to ortho thioethers

• Yang Li,
• Guillaume Dagousset,
• Emmanuel Magnier and
• Bruce Pégot

Beilstein J. Org. Chem. 2024, 20, 2108–2113, doi:10.3762/bjoc.20.181

• study, many research groups described a strategy for ortho-C–H functionalization of aryl sulfoxides with various nucleophiles via a cascade reaction of interrupted Pummerer reaction/sigmatropic rearrangement (Scheme 1a) [6][7][8][9][10][11]. A large range of nucleophiles, such as phenols [12][13][14][15

Harnessing the versatility of hydrazones through electrosynthetic oxidative transformations

• Aurélie Claraz

Beilstein J. Org. Chem. 2024, 20, 1988–2004, doi:10.3762/bjoc.20.175

• access to diazo compounds as either synthetic intermediates or products. A special attention is paid to the reaction mechanism with the aim to encourage further development in this field. Keywords: C–H functionalization; diazo compound; electrosynthesis; hydrazone; nitrogen-containing heterocycle

Solvent-dependent chemoselective synthesis of different isoquinolinones mediated by the hypervalent iodine(III) reagent PISA

• Ze-Nan Hu,
• Yan-Hui Wang,
• Jia-Bing Wu,
• Ze Chen,
• Dou Hong and
• Chi Zhang

Beilstein J. Org. Chem. 2024, 20, 1914–1921, doi:10.3762/bjoc.20.167

• isoquinolinone derivatives. The method provides highly chemoselective access to 3- or 4-substituted isoquinolinone derivatives by reacting o-alkenylbenzamide derivatives with PISA in either acetonitrile or wet hexafluoro-2-isopropanol. Keywords: annulation; C–H amination; hypervalent iodine reagent; iodine(III

• zwitterionic water-soluble hypervalent iodine reagent (phenyliodonio)sulfamate (PISA). In water, PISA is strongly acidic, and the pH value can reach 2.05 in a saturated aqueous solution. With PISA, various indoles have been synthesized via C–H amination of 2-alkenylanilines involving an aryl migration

Access to 2-oxoazetidine-3-carboxylic acid derivatives via thermal microwave-assisted Wolff rearrangement of 3-diazotetramic acids in the presence of nucleophiles

• Ivan Lyutin,
• Vasilisa Krivovicheva,
• Grigory Kantin and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2024, 20, 1894–1899, doi:10.3762/bjoc.20.164

• cyclization [15][16]. Additionally, the manganese(III)-promoted cyclization of N-alkenyl malonamides [17][18] and the Cu(I)-catalyzed reaction of propiolic acid derivatives with nitrones (Kinugasa reaction) [19][20][21] should also be mentioned, as well as intramolecular C–H insertion using

A facile three-component route to powerful 5-aryldeazaalloxazine photocatalysts

• Ivana Weisheitelová,
• Radek Cibulka,
• Marek Sikorski and
• Tetiana Pavlovska

Beilstein J. Org. Chem. 2024, 20, 1831–1838, doi:10.3762/bjoc.20.161

• (All) and also 5-deazaflavins (dFl) and 5-deazaalloxazines (dAll), where the N(5) atom of the isoalloxazine/alloxazine core is replaced by a C–H moiety (Figure 1A). In particular, 5-deazaflavins have generated considerable interest from scientists to study flavin-catalysed reactions in enzymatic and

Synthesis and characterization of 1,2,3,4-naphthalene and anthracene diimides

• Adam D. Bass,
• Daniela Castellanos,
• Xavier A. Calicdan and
• Dennis D. Cao

Beilstein J. Org. Chem. 2024, 20, 1767–1772, doi:10.3762/bjoc.20.155

• steric demands of the N-phenyl groups, there are also C–H···π interactions between phenyl groups of adjacent π stacks, with the closest Ph centroid to H distance being 2.613 Å (Figure 2a). Additionally, the middle carbonyl oxygens are in short contact (2.376 Å) with the 7- and 8-H atoms of the

• from the title compounds. Despite this different packing mode within the stack, the interstack interactions exhibited by 8-Ph are similar to those found in 7-Ph. Although there are still observable C–H···π interactions and C=O···H–C interactions between stacks, they appear to be weaker, as evidenced by

• -Ph as determined by X-ray crystallography. Representative C=O···H–C and C–H···π interactions are indicated in teal and magenta, respectively. Top-down views of π-stacking modes in c) 7-Ph and d, e) 8-Ph. Hydrogen atoms have been removed for clarity in c–e. Atom color code: C = tan, H = white, Cl

Syntheses and medicinal chemistry of spiro heterocyclic steroids

• Laura L. Romero-Hernández,
• Ana Isabel Ahuja-Casarín,
• Penélope Merino-Montiel,
• Sara Montiel-Smith,
• José Luis Vega-Báez and
• Jesús Sandoval-Ramírez

Beilstein J. Org. Chem. 2024, 20, 1713–1745, doi:10.3762/bjoc.20.152

• -Methylene spirolactones at C-3 11a and 11b derived from dihydrocholesterol and stanolone were also obtained in 41% and 52% yields, respectively (dr > 20:1) (Scheme 3). More recently, a functionalized spiro-β-lactone was obtained via a metal-free procedure involving photoinduced carbene C–H insertion in a

• C–H insertion to produce the spiro-β-lactone was accomplished by simply exposing the diazo derivative to 440 nm blue LEDs (Kessil lamp) at 50 °C, that favored the formation of a singlet carbene that reacted selectively by insertion into the C(3)–H bond. Spiro-lactones 14 were obtained in 80% yield

pKalculator: A pK_a predictor for C–H bonds

• Rasmus M. Borup,
• Nicolai Ree and
• Jan H. Jensen

Beilstein J. Org. Chem. 2024, 20, 1614–1622, doi:10.3762/bjoc.20.144

• Rasmus M. Borup Nicolai Ree Jan H. Jensen Department of Chemistry, University of Copenhagen, Copenhagen, DK-2100, Denmark 10.3762/bjoc.20.144 Abstract Determining the pKa values of various C–H sites in organic molecules offers valuable insights for synthetic chemists in predicting reaction sites

• . As molecular complexity increases, this task becomes more challenging. This paper introduces pKalculator, a quantum chemistry (QM)-based workflow for automatic computations of C–H pKa values, which is used to generate a training dataset for a machine learning (ML) model. The QM workflow is

• benchmarked against 695 experimentally determined C–H pKa values in DMSO. The ML model is trained on a diverse dataset of 775 molecules with 3910 C–H sites. Our ML model predicts C–H pKa values with a mean absolute error (MAE) and a root mean squared error (RMSE) of 1.24 and 2.15 pKa units, respectively

Regio- and stereochemical stability induced by anomeric and gauche effects in difluorinated pyrrolidines

• Ana Flávia Candida Silva,
• Francisco A. Martins and
• Matheus P. Freitas

Beilstein J. Org. Chem. 2024, 20, 1572–1579, doi:10.3762/bjoc.20.140

• , less stabilizing σCC→σ*CF interactions were anticipated. Moreover, besides the anomeric interaction, the pseudoaxially oriented C–F bonds in 17 and 19 facilitated efficient electron donation from vicinal antiperiplanar C–H bonds through σCH→σ*CF interactions (Figure 6). The methylene group separating

• -fluoropyrrolidinium cation and 3-fluoropyrrolidine. The conformational space of 2,3-, 2,4-, and 3,4-difluoropyrrolidines is notably dictated, both in the gas phase and implicit polar solution, by the N to C–F bond anomeric effect. Additionally, albeit less significant, electron delocalization from the C–H bonding

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• , over recent years much attention has been focused on C(sp3)–H fluorination, and several methods that are selective for benzylic C–H bonds have been reported. These protocols operate via several distinct mechanistic pathways and involve a variety of fluorine sources with distinct reactivity profiles

• . This review aims to give context to these transformations and strategies, highlighting the different tactics to achieve fluorination of benzylic C–H bonds. Keywords: benzylic; C–H functionalization; fluorination; photoredox catalysis; Introduction The development of new fluorination methodologies is

• compound, carry that functional group through synthesis and also protect any potentially labile group that would otherwise displace during the installation of the fluorine atom [6][7][8]. Therefore, methodologies for the selective C–H fluorination represent a valuable class of reactions [1][9][10], for

Synthesis of 4-functionalized pyrazoles via oxidative thio- or selenocyanation mediated by PhICl₂ and NH₄SCN/KSeCN

• Jialiang Wu,
• Haofeng Shi,
• Xuemin Li,
• Jiaxin He,
• Chen Zhang,
• Fengxia Sun and
• Yunfei Du

Beilstein J. Org. Chem. 2024, 20, 1453–1461, doi:10.3762/bjoc.20.128

• , Yotphan and colleagues realized a direct thiocyanation of N-substituted pyrazolones under metal-free conditions [49]. Besides, Choudhury and co-workers developed an additive and metal-free methodology for the C–H thiocyanation of aminopyrazoles, using H2O2 as a benign oxidizing agent (Scheme 1b) [41]. Pan

• presented a method for the C–H thiocyanation of pyrazoles by using a sustainable catalyst of graphite-phase carbon nitride (g-C3N4) under visible light irradiation (Scheme 1c) [2]. Furthermore, Yao harnessed an electrochemical approach to form the electrophilic SCN+ intermediate, which reacted with

Predicting bond dissociation energies of cyclic hypervalent halogen reagents using DFT calculations and graph attention network model

• Yingbo Shao,
• Zhiyuan Ren,
• Zhihui Han,
• Li Chen,
• Yao Li and
• Xiao-Song Xue

Beilstein J. Org. Chem. 2024, 20, 1444–1452, doi:10.3762/bjoc.20.127

• hypervalent iodine(III) reagents has been developed [12][13][14][15][16][17] (Figure 1), including the well-known Zhdankin reagents [13] and Togni reagents [14]. These reagents are popularly used as electrophilic group transfer reagents [18][19] in a variety of reactions, such as C–H functionalization [20][21

• applications [27][28][29][30]. For example, hypervalent bromine(III) reagents enable C–H amination and alkene aziridination reactions without the need for additional Lewis acid activation [31][32][33]. However, challenges in the synthesis and stabilization of cyclic hypervalent bromine and chlorine reagents

Generation of alkyl and acyl radicals by visible-light photoredox catalysis: direct activation of C–O bonds in organic transformations

• Mithu Roy,
• Bitan Sardar,
• Itu Mallick and
• Dipankar Srimani

Beilstein J. Org. Chem. 2024, 20, 1348–1375, doi:10.3762/bjoc.20.119

• –halogen bond formation, as well as C–H functionalization [27]. Some notable examples include C–H arylation, various cross-coupling reactions, oxidative coupling, and photocatalytic radical reactions. The advantages of visible-light-induced photoredox catalysis are due to the ability to utilize visible

• acyl radical. This acyl radical eventually leads to the formation of expected product. Reactions involving alkyl radical obtained via C–O bond cleavage C–O bond activation of prefunctionalized alcohols Alkyl radicals play a crucial role as intermediates in various chemical transformations involving C–H

• -state *[Ir(III)] complex can effectively oxidize the nitrogen atom of activated NHC–alcohol adduct 66 via SET. The resulting nitrogen radical cation intermediate 67 weakens the adjacent C–H bond, making it more acidic and susceptible to deprotonation by a suitable base, ultimately yielding an α-amino

Transition-metal-catalyst-free electroreductive alkene hydroarylation with aryl halides under visible-light irradiation

• Kosuke Yamamoto,
• Kazuhisa Arita,
• Masami Kuriyama and
• Osamu Onomura

Beilstein J. Org. Chem. 2024, 20, 1327–1333, doi:10.3762/bjoc.20.116

• versatile building blocks in organic syntheses. To achieve this transformation with high efficiency and predictable regioselectivity, numerous efforts have been made to develop transition-metal-catalyzed reactions based on a C–H activation strategy [1][2][3][4] or the reductive coupling of aryl halides with

Competing electrophilic substitution and oxidative polymerization of arylamines with selenium dioxide

• Vishnu Selladurai and
• Selvakumar Karuthapandi

Beilstein J. Org. Chem. 2024, 20, 1221–1235, doi:10.3762/bjoc.20.105

• due to N–H stretching of the polymer [43][44]. The peak appearing at around 3000 cm−1 corresponded to the aryl C–H stretching. The peaks observed at 1593 and 1479 cm−1 were associated with C=C and C=N stretching, respectively. The obtained result was further supported by solid-state synthesis of