Beyond symmetric self-assembly and effective molarity: unlocking functional enzyme mimics with robust organic cages

• Keith G. Andrews

Beilstein J. Org. Chem. 2025, 21, 421–443, doi:10.3762/bjoc.21.30

• ][344][345], which show early promise for low-symmetry cavities with catalytic potential [42][43][44][340]. Notably, Otte has used semi-stepwise self-assembly via imine formation/reduction to access a robust organic cage with reduced-symmetry and internal functionality able to chelate a copper(I) ion

• purification possibilities available for robust organic cages mean access to structural families via stepwise synthesis or statistical methods followed by separation is facile, as demonstrated by Otte [42][43][44] and ourselves [41]. The lack of internal functionality in cavities doesn’t just reduce the

The effect of neighbouring group participation and possible long range remote group participation in O-glycosylation

• Rituparna Das and
• Balaram Mukhopadhyay

Beilstein J. Org. Chem. 2025, 21, 369–406, doi:10.3762/bjoc.21.27

• in attaining the required stereospecific glycosylation outputs. Apart from the widely convenient stepwise synthesis, recently one-pot glycosylations have also made an important mark which minimise the tedious purification of the intermediate molecules in each step [53][54][55][56][57][58]. In the

Oxidation of [3]naphthylenes to cations and dications converts local paratropicity into global diatropicity

• Abel Cárdenas,
• Zexin Jin,
• Yong Ni,
• Jishan Wu,
• Yan Xia,
• Francisco Javier Ramírez and
• Juan Casado

Beilstein J. Org. Chem. 2025, 21, 277–285, doi:10.3762/bjoc.21.20

• theoretical Raman band at 1730 cm−1. FT-Raman spectra in CH2Cl2 (approx. 10−2 to 10−3 M) of: top) 1 (black), 1•+ (blue), and 12+ (red). Bottom) 2 (black), 2•+ (blue), and 22+ (red). Oxidations are carried out by stepwise addition of NOBF4 in CH2Cl2. Force constants for the CC stretching vibrational

Facile one-pot reduction of β-nitrostyrenes to phenethylamines using sodium borohydride and copper(II) chloride

• Laura D’Andrea and
• Simon Jademyr

Beilstein J. Org. Chem. 2025, 21, 39–46, doi:10.3762/bjoc.21.4

• reduction can be accomplished via catalytic hydrogenation, involving stepwise reactions and workup, use of additional reagents, and reaction time between 3 and 24 hours [11][12]. Most commonly, metal hydrides are employed, typically lithium aluminum hydride [13][14][15][16][17][18], requiring an inert

Non-covalent organocatalyzed enantioselective cyclization reactions of α,β-unsaturated imines

• Sergio Torres-Oya and
• Mercedes Zurro

Beilstein J. Org. Chem. 2024, 20, 3221–3255, doi:10.3762/bjoc.20.268

• azadiene in a stepwise mechanism: firstly, the vinylogous Michael addition of the dienolate to the double bond of the α,β-unsaturated N-sulfonylimine occurs in a stereoselective fashion. Subsequently, cyclization due to an intramolecular aza-Michael reaction and protonation leads to the enantioenriched

• alcohol E isomer and it coordinated to the squaramide in an effective orientation, a stepwise mechanism is taking place. Firstly, the dienolate adds to the azadiene which is followed by cyclization with formation of the C–N bond. Finally, protonation leads to the formation of the desired derivative. The

• excellent enantioselectivities (70–95% ee) when using chiral phosphoric acid XIV (Scheme 16). Mechanistic studies were performed to unveil whether a concerted or stepwise mechanism is taking place, such as trying to trap a possible iminium ion intermediate. The outcome of those experiments pointed towards a

Cyclodextrin-based rotaxanes for polymer materials: challenge on simultaneous realization of inexpensive production and defined structures

• Yosuke Akae

Beilstein J. Org. Chem. 2024, 20, 3026–3049, doi:10.3762/bjoc.20.252

Copper-catalyzed yne-allylic substitutions: concept and recent developments

• Shuang Yang and
• Xinqiang Fang

Beilstein J. Org. Chem. 2024, 20, 2739–2775, doi:10.3762/bjoc.20.232

• , 50a–l) axial chirality in remarkable enantiopurities. Mechanistic studies and deuterium labeling experiments have revealed that the reaction proceeds in a stepwise manner without involving a 1,5-H migration process. Based on these findings, the authors have proposed a mechanism wherein the

The scent gland composition of the Mangshan pit viper, Protobothrops mangshanensis

• Jonas Holste,
• Paul Weldon,
• Donald Boyer and
• Stefan Schulz

Beilstein J. Org. Chem. 2024, 20, 2644–2654, doi:10.3762/bjoc.20.222

• article. Numbers refer to the compounds in Table 1. Mass spectra of compounds A–F show characteristic similarities with m/z 141 and ions of the series m/z 41, 55, 69, 83 and m/z 95, 109, 123. The molecular ion increases stepwise by one methylene unit. Structural proposals for compounds A–F. Mass spectrum

Deciphering the mechanism of γ-cyclodextrin’s hydrophobic cavity hydration: an integrated experimental and theoretical study

• Stiliyana Pereva,
• Stefan Dobrev,
• Tsveta Sarafska,
• Valya Nikolova,
• Silvia Angelova,
• Tony Spassov and
• Todor Dudev

Beilstein J. Org. Chem. 2024, 20, 2635–2643, doi:10.3762/bjoc.20.221

• ) that the number of "true" hydrating water molecules in the γ-CD pore is about 7. Effect of the addition of pre-formed water clusters (bulk binding) The stepwise binding of water molecules to the cyclodextrin host appears to be a favorable process. As indicated in our previous studies on α- and β-CDs

• inclusion into CDs is energetically favorable, characterized predominantly by negative ΔH values. The first few incoming water molecules cluster around the narrow rim due to the higher electron density concentrated at this location. Gradually, a water cluster is formed inside the CD cavity by stepwise

• [13] and γ-CD dehydration follows a stepwise individual water release, β-CD dehydration is characterized by a one-step release process of water content [14]. A possible explanation of this fact is the different predominance of hydrogen bonds formed between water guests (cluster formation) and between

Efficient one-step synthesis of diarylacetic acids by electrochemical direct carboxylation of diarylmethanol compounds in DMSO

• Hisanori Senboku and
• Mizuki Hayama

Beilstein J. Org. Chem. 2024, 20, 2392–2400, doi:10.3762/bjoc.20.203

• proceeds in a stepwise or concerted manner, two-electron reduction of carbonate ion B generates the corresponding diphenylmethyl anion C, which reacts with carbon dioxide to produce a carbon–carbon bond that results in the formation of diphenyl acetate ion D. Electrochemical reduction of carbon dioxide

Hydrogen-bond activation enables aziridination of unactivated olefins with simple iminoiodinanes

• Phong Thai,
• Lauv Patel,
• Diyasha Manna and
• David C. Powers

Beilstein J. Org. Chem. 2024, 20, 2305–2312, doi:10.3762/bjoc.20.197

• iminoiodinanes: First, the reaction of PhINTs with either cis- or trans-β-methylstyrene (1n) in HFIP afforded aziridine 3n as a mixture of 2.0:1.0 cis/trans (from cis-1n) and 1.0:1.7 cis/trans (from trans-1n) (Scheme 4c). The formation of diastereomeric mixtures suggests that aziridination proceeds in a stepwise

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

1,2-Difluoroethylene (HFO-1132): synthesis and chemistry

• Liubov V. Sokolenko,
• Taras M. Sokolenko and
• Yurii L. Yagupolskii

Beilstein J. Org. Chem. 2024, 20, 1955–1966, doi:10.3762/bjoc.20.171

• ]-cycloaddition reaction of fluorinated ketones and aldehydes [49][100] were indicative of the fact that under photochemical conditions, this reaction is likely to be a stepwise process involving the formation of a biradical intermediate. Either (Z)- or (E)-1,2-difluoroethylene easily reacted with

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• /domino reaction, one-pot stepwise synthesis and multicomponent reaction. In the one-pot cascade reaction, the complexity of heterocycles was achieved due to the presence of functional groups formed in the GBB reaction which allow further reactions to occur. In the case of one-pot stepwise synthesis, the

• optimized conditions allowed them to create a library comprising of 26 polyheterocycles 82 with yields ranging from 71 to 94%. This protocol was scaled up to 10 mmol scale without losing the performance of the GBB multicomponent reaction. Recently, Xiong et al. [61] developed a one-pot stepwise synthesis

Oxidative fluorination with Selectfluor: A convenient procedure for preparing hypervalent iodine(V) fluorides

• Samuel M. G. Dearman,
• Xiang Li,
• Yang Li,
• Kuldip Singh and
• Alison M. Stuart

Beilstein J. Org. Chem. 2024, 20, 1785–1793, doi:10.3762/bjoc.20.157

• contains two trifluoromethyl groups in the sidearm which could alter the electronic effects significantly. We therefore decided to prepare a small series of monocyclic trifluoro(aryl)-λ5-iodanes, where the sidearm substituents were changed stepwise from methyl to trifluoromethyl groups, so that we also

• increased by the stepwise incorporation of the trifluoromethyl groups into the sidearm, but trifluoroiodane 22 was less stable than bicyclic difluoro(aryl)-λ5-iodane 6. Conclusion In summary, we have developed a new strategy using Selectfluor for the convenient preparation and isolation of hypervalent

Chemo-enzymatic total synthesis: current approaches toward the integration of chemical and enzymatic transformations

• Ryo Tanifuji and
• Hiroki Oguri

Beilstein J. Org. Chem. 2024, 20, 1693–1712, doi:10.3762/bjoc.20.151

• dearomatization of 33 via enantioselective hydroxylation using molecular oxygen and generates cyclohexadienone 34. As demonstrated by Corey [36] and Nicolaou [37], highly reactive intermediate 34 likely dimerizes non-enzymatically through stepwise reactions involving (1) an initial intermolecular Michael addition

Divergent role of PIDA and PIFA in the AlX₃ (X = Cl, Br) halogenation of 2-naphthol: a mechanistic study

• Kevin A. Juárez-Ornelas,
• Manuel Solís-Hernández,
• Pedro Navarro-Santos,
• J. Oscar C. Jiménez-Halla and
• César R. Solorio-Alvarado

Beilstein J. Org. Chem. 2024, 20, 1580–1589, doi:10.3762/bjoc.20.141

• reaction proceeds through a stepwise mechanism. Thus, the reaction starts with the coordination of aluminum bromide to an acetate ligand in PIDA to form the PIDA–AlBr3 adduct in a highly exergonic process. Similar to the previous section, the Gibbs free energy at this point was set as 0 kcal/mol for

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• functional groups on the aromatic ring and adjacent to the benzylic position. Mechanistic investigations suggested an initial electron transfer to generate a radical cation en route to the intermediate benzylic radical, rather than a HAT process, however, the authors did not distinguish between a stepwise

Synthesis of substituted triazole–pyrazole hybrids using triazenylpyrazole precursors

• Simone Gräßle,
• Laura Holzhauer,
• Nicolai Wippert,
• Olaf Fuhr,
• Martin Nieger,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2024, 20, 1396–1404, doi:10.3762/bjoc.20.121

• achieved with a total yield of 37% over all steps, comparable to the total yield of 45% for the stepwise synthesis in the liquid phase. This indicates a material loss due to the non-reactive regioisomer formation in the previous step and a non-quantitative cleavage process. In analogy to the one-pot

(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• substituted ortho-benzene. Stephenson and co-workers accessed 1,2-BCHeps 79a–c by insertion of alkenes into BCPs 78, and proposed the 1,2-BCHeps as isosteres of ortho-benzenes (Scheme 7A) [46]. The reaction proceeded via homolytic cleavage of a C–C bond adjacent to the imine functionality and stepwise alkene

Confirmation of the stereochemistry of spiroviolene

• Yao Kong,
• Yuanning Liu,
• Kaibiao Wang,
• Tao Wang,
• Chen Wang,
• Ben Ai,
• Hongli Jia,
• Guohui Pan,
• Min Yin and
• Zhengren Xu

Beilstein J. Org. Chem. 2024, 20, 852–858, doi:10.3762/bjoc.20.77

• either IM-9 or IM-11 cations. A direct dyotropic rearrangement, or two stepwise 1,2-alkyl migrations of IM-9, are possible pathways en route to cation IM-10. The presence of these intermediates IM-9, -10, -11 could be inferred by the identification of GJ1012B/D (5/6, Scheme 1D) [11], cattleyene (7) [19

Skeletal rearrangement of 6,8-dioxabicyclo[3.2.1]octan-4-ols promoted by thionyl chloride or Appel conditions

• Martyn Jevric,
• Julian Klepp,
• Johannes Puschnig,
• Oscar Lamb,
• Christopher J. Sumby and
• Ben W. Greatrex

Beilstein J. Org. Chem. 2024, 20, 823–829, doi:10.3762/bjoc.20.74

• work, which suggests a stepwise migration of oxygen from C5 to C4, followed by addition of the halogen nucleophile. Furthermore, if the halogen was involved in the transition state via the σ* orbital (avoiding intermediate 27), the opposite configuration would result at C2 in the products. The single

Regioselective quinazoline C2 modifications through the azide–tetrazole tautomeric equilibrium

• Dāgs Dāvis Līpiņš,
• Andris Jeminejs,
• Una Ušacka,
• Anatoly Mishnev,
• Māris Turks and
• Irina Novosjolova

Beilstein J. Org. Chem. 2024, 20, 675–683, doi:10.3762/bjoc.20.61

• % yield over 2 steps. The full conversion was achieved by keeping the reaction mixture at a temperature of 0 °C and by the stepwise additions of the sulfinate and NaN3. Any deviation from these conditions facilitated the formation of byproducts. In addition, the sulfonyl group dance reactions were carried

• product. Compounds 12 did not tolerate aqueous conditions or high temperatures and have also been observed to degrade under direct sunlight. Next, a stepwise one-pot approach was investigated to increase the overall yield (Scheme 6). The reaction in anhydrous DMF yielded a mixture of the desired product

Switchable molecular tweezers: design and applications

• Pablo Msellem,
• Maksym Dekthiarenko,
• Nihal Hadj Seyd and
• Guillaume Vives

Beilstein J. Org. Chem. 2024, 20, 504–539, doi:10.3762/bjoc.20.45

A new analog of dihydroxybenzoic acid from Saccharopolyspora sp. KR21-0001

• Rattiya Janthanom,
• Yuta Kikuchi,
• Hiroki Kanto,
• Tomoyasu Hirose,
• Arisu Tahara,
• Takahiro Ishii,
• Arinthip Thamchaipenet and
• Yuki Inahashi

Beilstein J. Org. Chem. 2024, 20, 497–503, doi:10.3762/bjoc.20.44

• minute) for 7 days. Purification and extraction The 7-day culture broth of Saccharopolyspora sp. KR21-0001 was centrifuged at 3000 rpm for 10 min. The supernatant fraction was eluted stepwise with 1.5 L of MeOH/H2O (0%, 50%, and 100%) through a HP20 column (55 i.d. × 500 mm), and all fractions were