Synthetic study toward vibralactone

• Liang Shi,
• Jiayi Song,
• Yiqing Li,
• Jia-Chen Li,
• Shuqi Li,
• Li Ren,
• Zhi-Yun Liu and
• Hong-Dong Hao

Beilstein J. Org. Chem. 2025, 21, 2376–2382, doi:10.3762/bjoc.21.182

• 1,3-diol intermediate was transformed into acetonide 25 (Scheme 5). Subsequently, the desired five-membered ring was successfully constructed through the in situ-generated alkylidene carbene 26 followed by C–H insertion; herein lies a significant electronic effect influencing this crucial step. With

Rotaxanes with integrated photoswitches: design principles, functional behavior, and emerging applications

• Jullyane Emi Matsushima,
• Khushbu,
• Zuliah Abdulsalam,
• Udyogi Navodya Kulathilaka Conthagamage and
• Víctor García-López

Beilstein J. Org. Chem. 2025, 21, 2345–2366, doi:10.3762/bjoc.21.179

• in-situ generation of toxic 1O2. Fumaramide Fumaramide is a bisamide photoswitch with a thermally stable trans-olefin, which, upon UV light irradiation, undergoes trans-to-cis isomerization, affording the corresponding maleamide (Figure 2). These photoswitches are distinct due to their ability to

Recent advances in Norrish–Yang cyclization and dicarbonyl photoredox reactions for natural product synthesis

• Peng-Xi Luo,
• Jin-Xuan Yang,
• Shao-Min Fu and
• Bo Liu

Beilstein J. Org. Chem. 2025, 21, 2315–2333, doi:10.3762/bjoc.21.177

• , enabling the total synthesis of 13 via in situ intramolecular lactonization as a key step. Computational and experimental studies reveal that the regio- and stereoselectivity of the Norrish−Yang cyclization are governed by the influence of the methyl group at C10: (1) In terms of regioselectivity, the 1,3

• blue LEDs at room temperature constructed a single diastereoisomer 23 in 90% yield. From 23, the ABCDE pentacyclic skeleton of phainanoids (27) was ultimately established via a Mitsunobu reaction, intramolecular nucleophilic substitution with in situ-generated aryllithium, and protecting group

• protection as ketal and nitrile reduction. The two building blocks (76 and 81) were then merged through the desired formal [3 + 3]-cycloaddition to generate N-desmethyl-α-obscurine (82), presumably via in situ-generated intermediates 76a and 81a, respectively. Subsequent Boc protection of the cyclic amine in

Halogenated butyrolactones from the biomass-derived synthon levoglucosenone

• Johannes Puschnig,
• Martyn Jevric and
• Ben W. Greatrex

Beilstein J. Org. Chem. 2025, 21, 2297–2301, doi:10.3762/bjoc.21.175

• species in situ was crucial for this transformation. By modifying a procedure for the trifluoromethylation of ketene dithioacetals reported by Liu and co-workers using TMSCF3 [43], rapid consumption of enamine 15 was observed. Acidic treatment of the intermediate promoted the hydrolysis/elimination

Pathway economy in cyclization of 1,n-enynes

• Hezhen Han,
• Wenjie Mao,
• Bin Lin,
• Maosheng Cheng,
• Lu Yang and
• Yongxiang Liu

Beilstein J. Org. Chem. 2025, 21, 2260–2282, doi:10.3762/bjoc.21.173

• and hydrogen elimination then occurred, affording 3-azabicyclo[4.1.0]hepta-2,4-diene derivatives 156. In contrast, when the temperature was raised to 110 °C, intermediate 155 underwent a 6π electrocyclic ring-opening, which was trapped by in situ-generated cyanide ions to form 4,5-dihydro-3H-azepines

Pd-catalyzed dehydrogenative arylation of arylhydrazines to access non-symmetric azobenzenes, including tetra-ortho derivatives

• Loris Geminiani,
• Kathrin Junge,
• Matthias Beller and
• Jean-François Soulé

Beilstein J. Org. Chem. 2025, 21, 2234–2242, doi:10.3762/bjoc.21.170

• proposed. In the first step a C–N-coupling reaction with phenylhydrazine occurs [57]. The catalytic cycle starts by the formation of Pd(0) in situ through reduction facilitated by phosphine and water [58]. This is followed by the oxidative addition of aryl bromides, leading to the formation of the Pd(II

Thiadiazino-indole, thiadiazino-carbazole and benzothiadiazino-carbazole dioxides: synthesis, physicochemical and early ADME characterization of representatives of new tri-, tetra- and pentacyclic ring systems and their intermediates

• Gyöngyvér Pusztai,
• László Poszávácz,
• Anna Vincze,
• András Marton,
• Ahmed Qasim Abdulhussein,
• Judit Halász,
• András Dancsó,
• Gyula Simig,
• György Tibor Balogh and
• Balázs Volk

Beilstein J. Org. Chem. 2025, 21, 2220–2233, doi:10.3762/bjoc.21.169

• derivatives 10a,b exhibiting an extended aromatic ring system were isolated instead of the expected primarily formed congeners 11a,b, due to in situ oxidation of the C–C bond. Alternatively, when the one-pot method (method B, bismuth nitrate pentahydrate + PPA, MeOH, closed vial, 110 °C) was applied for the

Electrochemical cyclization of alkynes to construct five-membered nitrogen-heterocyclic rings

• Lifen Peng,
• Ting Wang,
• Zhiwen Yuan,
• Bin Li,
• Zilong Tang,
• Xirong Liu,
• Hui Li,
• Guofang Jiang,
• Chunling Zeng,
• Henry N. C. Wong and
• Xiao-Shui Peng

Beilstein J. Org. Chem. 2025, 21, 2173–2201, doi:10.3762/bjoc.21.166

• ][254], this approach exhibited the following advantages like without metal catalysts and external oxidants, atom economy, facile access of starting materials, etc. In 2024, Cho succeeded in the preparation of trifluoromethylated oxazoles through in-situ aminotrifluoromethylation/cyclization of alkynes

C2 to C6 biobased carbonyl platforms for fine chemistry

• Jingjing Jiang,
• Muhammad Noman Haider Tariq,
• Florence Popowycz,
• Yanlong Gu and
• Yves Queneau

Beilstein J. Org. Chem. 2025, 21, 2103–2172, doi:10.3762/bjoc.21.165

• of Lewis acid–base bifunctional catalyst (Zr-β zeolite and K2CO3) in the Meerwein–Ponndorf–Verley reduction of a concentrated furfural solution (17.3–80.5 wt % in ethanol) combined with in situ cross-aldol condensation with acetaldehyde and crotonization. Ethanol was used as hydrogen donor for the

• Meerwein–Ponndorf–Verley reduction, while acetaldehyde is generated in situ by ethanol oxidation (Scheme 50). The equilibrium allows furfural to be simultaneously converted into furfuryl alcohol and 3-(2-furyl)acrolein in one pot through a redox reaction. The highest mass conversion rate of furfural can

• hydrolysis (Scheme 59). Furfural was employed as starting scaffold in a protocol developed to form acetals as fuel additives. The acyclic acetal is generated in situ from crude furfural with propanol in dimethyl carbonate using a nanoporous aluminosilicate material Al-13-(3.18) as catalyst, and then

The application of desymmetric enantioselective reduction of cyclic 1,3-dicarbonyl compounds in the total synthesis of terpenoid and alkaloid natural products

• Dong-Xing Tan and
• Fu-She Han

Beilstein J. Org. Chem. 2025, 21, 2085–2102, doi:10.3762/bjoc.21.164

• , protection of the resultant primary alcohol, and hydrogenation afforded ketone 65. The LaCl3·LiCl-promoted addition of 65 with Grignard reagent followed by TES protection of the resulting secondary alcohol, regioselective deprotection of the TES group and in situ oxidation provided aldehyde 66. Next, 66

• 77 and subsequent deprotection produced tertiary alcohol 78. Starting from this common intermediate, on the one hand, through successive manipulations by diazotization and in situ azide substitution, AgNO3-mediated aza-Cope/Mannich [62] reaction delivered ketone 79. Subsequently, a three-step

• operation including azide–alkene dipolar cycloaddition, irradiation of the resulting triazoline to aziridine 80 and in situ ring opening followed by deacetylation achieved the first total synthesis of (−)-hunterine A (14). On the other hand, aza-Cope/Mannich reaction of 78 produced imine intermediate 81

Further elaboration of the stereodivergent approach to chaetominine-type alkaloids: synthesis of the reported structures of aspera chaetominines A and B and revised structure of aspera chaetominine B

• Jin-Fang Lü,
• Jiang-Feng Wu,
• Jian-Liang Ye and
• Pei-Qiang Huang

Beilstein J. Org. Chem. 2025, 21, 2072–2081, doi:10.3762/bjoc.21.162

• synthesis of (–)-isochaetominine A was increased from 25.4% to 30.8% over five steps. Secondly, a new protocol featuring the use of an aged solution of K2CO3/MeOH to quench the DMDO epoxidation-triggered cascade reaction was developed, which allowed the in situ selective mono- or double epimerization at C11

Aryl iodane-induced cascade arylation–1,2-silyl shift–heterocyclization of propargylsilanes under copper catalysis

• Rasma Kroņkalne,
• Rūdolfs Beļaunieks,
• Armands Sebris,
• Anatoly Mishnev and
• Māris Turks

Beilstein J. Org. Chem. 2025, 21, 1984–1994, doi:10.3762/bjoc.21.154

• ) catalytic cycle [28]. However, in the case of Cu(OTf)2, the active catalytic species must be generated in situ. The highest diene 10a NMR yields (63–66%) were achieved by using 20 mol % of CuCl, 3.0 equiv of Ph2IOTf (I-2) and 1.2 equiv of 2,6-di-tert-butylpyridine (B1) in EtOAc at 70 °C (Table 1, entries 16

Enantioselective desymmetrization strategy of prochiral 1,3-diols in natural product synthesis

• Lihua Wei,
• Rui Yang,
• Zhifeng Shi and
• Zhiqiang Ma

Beilstein J. Org. Chem. 2025, 21, 1932–1963, doi:10.3762/bjoc.21.151

• ring was assembled via a one-pot mercuriocyclization/reductive demercuration of 153 followed by two-step diol-deprotection to access compound 154. Using trifluoromethylmethyldioxirane, which was generated in situ from trifluoroacetone, Oxone®, and disodium ethylenediaminetetraacetate dihydrate (Na2EDTA

Stereoselective electrochemical intramolecular imino-pinacol reaction: a straightforward entry to enantiopure piperazines

• Margherita Gazzotti,
• Fabrizio Medici,
• Valerio Chiroli,
• Laura Raimondi,
• Sergio Rossi and
• Maurizio Benaglia

Beilstein J. Org. Chem. 2025, 21, 1897–1908, doi:10.3762/bjoc.21.147

• significant attention in this context due to its flexibility, efficiency, and practical applicability. Since the late 1980s, many research groups have investigated the use of in situ-generated low-valent titanium [20][21][22][23][24][25] and niobium [26] reagents to promote the pinacol-type coupling of imines

• described a new electrochemical procedure to provide vicinal diamines involving the use of Sn electrodes as both anode and cathode in a divided cell, Mn(OAc)3·2H2O as additive and n-Bu4NOAc as electrolyte. Under these conditions, using aldehydes and amines as starting materials to form the imines in situ

Preparation of spirocyclic oxindoles by cyclisation of an oxime to a nitrone and dipolar cycloaddition

• Beth L. Ritchie,
• Alexandra Longcake and
• Iain Coldham

Beilstein J. Org. Chem. 2025, 21, 1890–1896, doi:10.3762/bjoc.21.146

• an important class of compounds with significant biological activities. Spirocyclic derivatives are present in a variety of natural products. We describe here the formation of spirooxindoles using an intermolecular nitrone cycloaddition reaction. The nitrone dipole was prepared in situ by cyclisation

• of an oxime, itself prepared in situ from an aldehyde. The stereochemistry of one of the spirooxindoles was determined by single crystal X-ray diffraction studies via crystallisation using encapsulated nanodroplet crystallisation (ENaCt) protocols. The chemistry involves cascade or tandem

Fe-catalyzed efficient synthesis of 2,4- and 4-substituted quinolines via C(sp²)–C(sp²) bond scission of styrenes

• Prafull A. Jagtap,
• Manish M. Petkar,
• Vaishnavi R. Sawant and
• Bhalchandra M. Bhanage

Beilstein J. Org. Chem. 2025, 21, 1799–1807, doi:10.3762/bjoc.21.142

• styrene, leading to the in situ generation of two valuable intermediates that act as dual synthons for the synthesis of 2,4- and 4-substituted quinolines. As part of our ongoing efforts to develop innovative C–C and C–H activation strategies for constructing nitrogen-containing heterocycles [55][56], we

• during GC–MS analysis) and formaldehyde (2a′′) via C–C bond scission of styrene in the presence of FeIII/O2, possibly through a 1,2-addition of O2 to styrene [49][58][59][60]. This in-situ generated aldehyde species then undergoes condensation with the amine 1a, leading to the formation of the

• cleavage of styrenes, catalyzed by earth-abundant iron, followed by the in-situ utilization of the resulting cleaved synthon in a domino process to synthesize highly substituted quinoline derivatives. We have demonstrated that this process can efficiently convert readily available feedstocks, including a

Synthesis of chiral cyclohexane-linked bisimidazolines

• Changmeng Xi,
• Qingshan Sun and
• Jiaxi Xu

Beilstein J. Org. Chem. 2025, 21, 1786–1790, doi:10.3762/bjoc.21.140

• , condensation of N-sulfonylated 1,2-diphenylethane-1,2-diamines and cyclohexane-1,2-dicarboxylic acid, and the final cyclization with the in situ generated Hendrickson reagent. Keywords: bisimidazoline; cyclohexane; cyclohexane-1,2-dicarboxylic acid; 1,2-diphenylethane-1,2-diamine; Introduction Chiral

• in the formation of cyclohexane-1,2-dicarboxamides 4 due to their poor nucleophilicity. Finally, (1S,2S)-N1,N2-bis((1R,2R)-2-(sulfonamido)-1,2-diphenylethyl)cyclohexane-1,2-dicarboxamides 4 were cyclized with the Hendrickson reagent (triphenylphosphonium anhydride triflate in situ generated from

Research progress on calixarene/pillararene-based controlled drug release systems

• Liu-Huan Yi,
• Jian Qin,
• Si-Ran Lu,
• Liu-Pan Yang,
• Li-Li Wang and
• Huan Yao

Beilstein J. Org. Chem. 2025, 21, 1757–1785, doi:10.3762/bjoc.21.139

Approaches to stereoselective 1,1'-glycosylation

• Daniele Zucchetta and
• Alla Zamyatina

Beilstein J. Org. Chem. 2025, 21, 1700–1718, doi:10.3762/bjoc.21.133

• coordination of the boron center with the remaining C2-OH group increases its acidity, thereby generating in situ an acidic catalyst for the activation of the glycosyl donor [62][63]. In this approach, the use of glycosyl phosphites of gluco- (35) and galacto- (38) configuration as donors, in combination with

• donors of gluco-, galacto-, and manno-configuration, using a sulfonium-type promoter generated in situ from dimethyl disulfide (Me2S2) and triflic anhydride (Tf2O) [66][70]. The use of common acid scavengers, such as DTBP (di-tert-butylmethylpyridine), was not recommended, as glycosylation reactions

• 3,4,6-tri-O-benzylated 1,2-anhydroglucose 129 using an organoboron catalyst (Scheme 11). In situ-generated tricyclic borinate complexes (formed between 1,2-glycosyl diols and diarylborinic acids) effectively promoted the glycosylation with glycosyl anhydro sugars, yielding the 1,1'-α,α-trehalose

Structural analysis of stereoselective galactose pyruvylation toward the synthesis of bacterial capsular polysaccharides

• Tsun-Yi Chiang,
• Mei-Huei Lin,
• Chun-Wei Chang,
• Jinq-Chyi Lee and
• Cheng-Chung Wang

Beilstein J. Org. Chem. 2025, 21, 1671–1677, doi:10.3762/bjoc.21.131

• same reaction mixture, in situ activation of disaccharide donor 8 and acceptor 9 using TolSCl/AgOTf reagent combination was introduced. This two-step, one-pot glycosylation gave a 42% yield of disaccharide 10, maintaining good β-stereoselectivity at the galactosyl linkage (α/β = 1:5.8). The 2

• position of the galactoside using 1.3 equivalents of bis(trimethylsilyl)amine (HMDS), concurrently leaving the 3-OH group at the non-reducing end available for glycosylation with the ᴅ-Galf donor 12 [47]. After the in situ activation with TolSCl/AgOTf, product 13 was obtained with a 76% yield and exclusive

Influence of the cation in hypophosphite-mediated catalyst-free reductive amination

• Natalia Lebedeva,
• Fedor Kliuev,
• Olesya Zvereva,
• Klim Biriukov,
• Evgeniya Podyacheva,
• Maria Godovikova,
• Oleg I. Afanasyev and
• Denis Chusov

Beilstein J. Org. Chem. 2025, 21, 1661–1670, doi:10.3762/bjoc.21.130

• synthesis of esters of phosphonous or alkylphosphinic acids [33][34][35]. Only a single application of cesium hypophosphite was shown in the literature. CsH2PO2 was prepared in situ and used for formation C–P bond by radical addition to unsaturated carboxylic acids [36 ]To summarize the above, it is crucial

• to fundamentally study the influence of the cations in hypophosphites on this process. In this work, the hypophosphites of Li, K, Rb, and Cs were obtained in situ, the influence of alkali metal cations on the efficiency of reductive amination was assessed and the obtained results were compared with

• investigation of cation influence on the efficiency of reductive amination, a commercially available NaH2PO2, and in situ synthesized LiH2PO2, NaH2PO2, KH2PO2, RbH2PO2, and CsH2PO2 were compared. To account for the reactivity of H3PO2 as is, the reaction outcome both for the neutral XH2PO2 (where X is Li, Na, K

Facile synthesis of hydantoin/1,2,4-oxadiazoline spiro-compounds via 1,3-dipolar cycloaddition of nitrile oxides to 5-iminohydantoins

• Juliana V. Petrova,
• Varvara T. Tkachenko,
• Victor A. Tafeenko,
• Anna S. Pestretsova,
• Vadim S. Pokrovsky,
• Maxim E. Kukushkin and
• Elena K. Beloglazkina

Beilstein J. Org. Chem. 2025, 21, 1552–1560, doi:10.3762/bjoc.21.118

• '-disubstituted ureas were initially reacted with oxalyl chloride to form imidazolidinetriones 1a,b, which were then added to an iminophosphorane formed in situ from an aryl azide and triphenylphosphine. As a result of the aza-Wittig reaction, 5-iminohydantoins 2a–i were then used as dipolarophiles in the 32CA

• carbethoxyformonitrile oxide (CEFNO) precursor. The nitrile oxides were generated in situ by the action of a base (Et3N) to compounds 4a–d in the dipolarophile-containing solution to prevent high concentrations of dipole molecules and to minimize the inevitable competition between the 32CA reaction and the isomerization

Ambident reactivity of enolizable 5-mercapto-1H-tetrazoles in trapping reactions with in situ-generated thiocarbonyl S-methanides derived from sterically crowded cycloaliphatic thioketones

• Grzegorz Mlostoń,
• Małgorzata Celeda,
• Marcin Palusiak,
• Heinz Heimgartner,
• Marta Denel-Bobrowska and
• Agnieszka B. Olejniczak

Beilstein J. Org. Chem. 2025, 21, 1508–1519, doi:10.3762/bjoc.21.113

• of Lodz, Pomorska 163/165, 90-236 Łódź, Poland Department of Chemistry, University of Zurich, Winterthurerstrasse 190, CH-8057 Zurich, Switzerland Institute of Medical Biology, Polish Academy of Sciences, 106 Lodowa St., 93-232 Łódź, Poland 10.3762/bjoc.21.113 Abstract The in situ-generated

• protonate this basic fragment, undergo 1,3-addition leading to corresponding products of S,S-, O,S-, or N,S-acetal type. For example, trapping of the in situ-generated adamantanethione S-methanide (1a) with tert-butylthiol or benzyl alcohol leads to the corresponding S,S-dithioacetal and O,S-thioacetal

• -established methodology, transient thiocarbonyl S-methanides 1 should be generated in situ by thermal decomposition of their precursors, i.e., spiro-1,3,4-thiadiazolines 2 [5][6]. In contrast to adamantanethione (7a), which reacts with diazomethane (CH2N2) yielding a mixture of regioisomeric 1,3,4- and 1,2,3

Oxetanes: formation, reactivity and total syntheses of natural products

• Peter Gabko,
• Martin Kalník and
• Maroš Bella

Beilstein J. Org. Chem. 2025, 21, 1324–1373, doi:10.3762/bjoc.21.101

• and the resulting 1,3-acetyloxyiodides 37 were treated in situ with methanolic t-BuOK to promote the cyclisation. Best results for the oxetane formation were obtained for dimethylphenylvinylsilane, while alkenes without the silyl group afforded mainly homoallylic alcohols 39, presumably through an

• groups including esters, ketones, sulphones and heteroaryls. The mechanistic proposal, supported by DFT calculations, starts with an oxidative decarboxylation to give an aminooxetanyl radical 157. This species is in turn coupled with the aryl halide by the active Ni(0) catalyst (generated in situ by

• followed by an acid-catalysed intramolecular oxetane opening (Scheme 53) [107]. Although it is not a true domino process as the ring opening does not take place in situ, the work-up after the first step involves only a short column

Recent advances in oxidative radical difunctionalization of N-arylacrylamides enabled by carbon radical reagents

• Jiangfei Chen,
• Yi-Lin Qu,
• Ming Yuan,
• Xiang-Mei Wu,
• Heng-Pei Jiang,
• Ying Fu and
• Shengrong Guo

Beilstein J. Org. Chem. 2025, 21, 1207–1271, doi:10.3762/bjoc.21.98